updating common esphome sensors

finally fixing hvac-multisensor. All of this was caused by the display switch referenced the display while it wasn't plugged in. Updated code to check for the existence first.
2026-08-10 02:50:12 -04:00 · 2025-07-20 12:33:08 -04:00
parent 4e0e55ac3c
commit 75fb9c2ab8
31 changed files with 1315 additions and 600 deletions
@@ -0,0 +1,212 @@
+# 3v3 en svp sun 34 35 32 33 25 26 27 14 12 gnd 13 sd2 sd3 gnd 5v
+substitutions:
+  devicename: hvac-multisensor-425f4f
+  entity_name: hvac_multisensor
+  friendly_name: HVAC MultiSensor
+  comment: Clever MultiSensor
+  platform: ESP32
+  board: wemos_d1_mini32
+  static_ip: !secret hvac-multisensor-ip
+
+  sda_pin: GPIO21
+  scl_pin: GPIO22
+  door_pin: GPIO19
+  one_wire_pin: GPIO14
+  trigger_pin: GPIO04
+  echo_pin: GPIO12
+
+  #mdc_pin: GPIO23
+  #mdio_pin: GPIO18
+  #clk_mode: GPIO17_OUT
+  #power_pin: GPIO5
+
+packages:
+  #wifi: !include common/wifi_no_power_save.yaml
+  ethernet: !include common/ethernet.yaml
+  device_base: !include common/device_base.yaml
+  ble_proxy: !include common/ble_proxy.yaml
+
+esphome:
+  name: ${devicename}
+  friendly_name: ${friendly_name}
+  name_add_mac_suffix: false
+
+esp32:
+  board: ${board}
+  framework:
+    type: esp-idf
+
+web_server:
+  port: 80
+  version: 3
+  include_internal: true
+
+# Enable logging
+logger:
+
+api: # Using settings from common/device_base.yaml
+
+ota: # Using settings from common/device_base.yaml
+
+esp32_ble_tracker:
+
+# globals:
+#   - id: screen_power
+#     type: bool
+#     restore_value: yes
+#     initial_value: 'true'
+
+# font:
+#   - file: 'CascadiaMonoPL.ttf'
+#     id: font1
+#     size: 17
+
+# one_wire:
+#   - platform: gpio
+#     pin: ${one_wire_pin}
+
+# i2c:
+#   sda: ${sda_pin}
+#   scl: ${scl_pin}
+#   frequency: 800kHz
+
+# display:
+#   - platform: ssd1306_i2c
+#     id: oled
+#     model: "SSD1306 128x64"
+#     #reset_pin: GPIO14 #D0
+#     address: 0x3C
+#     lambda: |-
+#       it.print(0, 0, id(font1), "Delta:");
+#       it.printf(128, 0, id(font1), TextAlign::TOP_RIGHT, "%.1f°F", id(hvac_delta).state);
+#       it.print(0, 16, id(font1), "Supply:");
+#       it.printf(128, 16, id(font1), TextAlign::TOP_RIGHT, "%.1f°F", id(hvac_supply).state);
+#       it.print(0, 32, id(font1), "Return:");
+#       it.printf(128, 32, id(font1), TextAlign::TOP_RIGHT, "%.1f°F", id(hvac_return).state);
+#       it.print(0, 48, id(font1), "Ambient:");
+#       it.printf(128, 48, id(font1), TextAlign::TOP_RIGHT, "%.1f°F", id(ambient).state);
+
+# sensor:
+#   - platform: dallas_temp
+#     address: 0xB33C01B607798528
+#     name: "Return Temperature"
+#     id: hvac_return
+#     update_interval: 10s
+#     filters:
+#       - lambda: return x * (9.0/5.0) + 32.0;
+#     unit_of_measurement: "°F"
+#     state_class: measurement
+
+#   - platform: dallas_temp
+#     address: 0x0F3C01B6070C1328
+#     name: "Supply Temperature"
+#     id: hvac_supply
+#     update_interval: 10s
+#     filters:
+#       - lambda: return x * (9.0/5.0) + 32.0;
+#     unit_of_measurement: "°F"
+#     state_class: measurement
+
+#   - platform: dallas_temp
+#     address: 0xFA3C01B607005B28
+#     name: "Ambient Temperature"
+#     id: ambient
+#     update_interval: 10s
+#     filters:
+#       - lambda: return x * (9.0/5.0) + 32.0;
+#     unit_of_measurement: "°F"
+#     state_class: measurement
+
+#   - platform: template
+#     name: "Delta Temperature"
+#     id: hvac_delta
+#     lambda: |-
+#       return (id(hvac_supply).state - id(hvac_return).state);
+#     update_interval: 10s
+#     unit_of_measurement: "°F"
+#     state_class: measurement
+#     filters:
+#       - or:
+#         - throttle: 60s
+#         - delta: 1.0
+
+#   - platform: ultrasonic
+#     trigger_pin: ${trigger_pin}
+#     echo_pin: ${echo_pin}
+#     id: ultrasonic_source
+#     #update_interval: 5s
+#     internal: True
+#     filters:
+#     - sliding_window_moving_average:
+#         window_size: 5
+#         send_every: 5
+#         send_first_at: 1
+#     on_value:
+#       then:
+#         - sensor.template.publish:
+#             id: distance_from_bottom
+#             state: !lambda 'return id(ultrasonic_source).state;'
+
+#         - sensor.template.publish:
+#             id: distance_from_top
+#             state: !lambda 'return id(ultrasonic_source).state;'
+
+#   - platform: template
+#     unit_of_measurement: "cm"
+#     state_class: measurement
+#     id: distance_from_bottom
+#     name: "Salt Level in CM"
+#     #update_interval: 5s
+#     filters:
+#     - lambda: 'return (0.94 - (id(ultrasonic_source).state)) * 100;'
+#     on_value:
+#       then:
+#         - sensor.template.publish:
+#             id: level_in_bags
+#             state: !lambda 'return id(distance_from_bottom).state;'
+
+#   - platform: template
+#     unit_of_measurement: "cm"
+#     state_class: measurement
+#     id: distance_from_top
+#     name: "Salt Level From Top in CM"
+#     #update_interval: 5s
+#     filters:
+#     - lambda: 'return (id(ultrasonic_source).state) * 100;'
+
+#   - platform: template
+#     unit_of_measurement: "bags"
+#     state_class: measurement
+#     id: level_in_bags
+#     name: "Salt Level in Bags"
+#     #update_interval: 5s
+#     filters:
+#     - lambda: 'return (id(distance_from_bottom).state) / 17.5;'
+
+# binary_sensor:
+#   - platform: gpio
+#     name: "Door"
+#     device_class: door
+#     pin:
+#       number: ${door_pin}
+#       mode: INPUT_PULLUP
+
+# switch:
+#   - platform: template
+#     id: display_switch
+#     name: "Display"
+#     lambda: |-
+#       if (id(screen_power)) {
+#         id(oled).turn_on();
+#       } else {
+#         id(oled).turn_off();
+#       }
+#       return id(screen_power);
+#     turn_on_action:
+#       - lambda: |-
+#           id(screen_power) = true;
+#           // id(oled).turn_on();
+#     turn_off_action:
+#       - lambda: |-
+#           id(screen_power) = false;
+#           // id(oled).turn_off();