fresh-home/esphome/backup/furnace-room-multisensor.yaml

substitutions:
  devicename: furnace-room-multisensor
  entity_name: furnace_room_multisensor
  friendly_name: Furnace Room MultiSensor
  comment: Clever MultiSensor
  board: nodemcuv2
  static_ip: !secret furnace-room-multisensor-ip


# For the reed switches
  door: 35
  moisture: 36

# For the ultrasonic sensor
  trigger: 14
  echo: 15

# Infrared Sensor
  ir_tx: 12
  ir_rx: 39

# I2C Pins
  i2c_sda: 13
  i2c_scl: 16

# For the ethernet adapter
  ethernet_mdc_pin: 23
  ethernet_mdio_pin: 18
  ethernet_clk_pin: 0

# For the relays
  relay1: 32
  relay2: 33

# Built-in button
  button1: 34

# For the HVAC temperature sensors
  one_wire: 17

one_wire:
  - platform: gpio
    pin: ${one_wire}

esphome:
  name: ${devicename}
  friendly_name: ${friendly_name}
  name_add_mac_suffix: false

packages:
  network: !include common/olimex_evb.yaml
  device_base: !include common/device_base.yaml


# Included in common/olimex-evb.yaml
# esp32:
#   board: esp32dev
#   framework:
#     type: esp-idf

# Enable logging
logger:

web_server:
  port: 80
  version: 3
  include_internal: True

# # Enable Home Assistant API
# api:
#   encryption:
#     key: "mupTLNBggWPdKHxBeY1yV47qXgyhVJUgIVVAvfGrZ40="

# ota:
#   - platform: esphome
#     password: "b43bd5c6f724d64a9bd4e92504830d8f"

remote_receiver:
  pin: ${ir_rx}
  dump: all

remote_transmitter:
  pin: ${ir_tx}
  carrier_duty_percent: 50%

i2c:
  sda: ${i2c_sda}
  scl: ${i2c_scl}
  scan: true
  id: bus_a

binary_sensor:
  - platform: gpio
    name: "ESP32-EVB button"
    pin: ${button1}

  - platform: gpio
    name: "Door"
    device_class: door
    filters:
      - invert:
    pin:
      number: ${door}
      # mode: INPUT_PULLUP

  - platform: gpio
    name: "Moisture"
    device_class: moisture
    pin:
      number: ${moisture}
      # mode: INPUT_PULLUP


switch:
  - platform: gpio
    pin: ${relay1}
    name: "Relay1"

  - platform: gpio
    pin: ${relay2}
    name: "Relay2"

sensor:
  - platform: ultrasonic
    trigger_pin: ${trigger}
    echo_pin: ${echo}
    id: ultrasonic_source
    update_interval: 1s
    internal: True
    filters:
      - sliding_window_moving_average:
          window_size: 5
          send_every: 5
          send_first_at: 1
      - lambda: 'return round( x * 10.0) / 10.0;'
      - clamp:
          min_value: 0.0
          max_value: 150.0
    on_value:
      then:
        - sensor.template.publish:
            id: distance_from_bottom
            state: !lambda 'return id(ultrasonic_source).state;'

        - sensor.template.publish:
            id: distance_from_top
            state: !lambda 'return id(ultrasonic_source).state;'

  - platform: template
    unit_of_measurement: "cm"
    state_class: measurement
    id: distance_from_bottom
    name: "Salt Level in CM"
    icon: mdi:arrow-collapse-up
    disabled_by_default: true
    #update_interval: 5s
    filters:
      - lambda: 'return (0.94 - x) * 100;'
      - clamp:
          min_value: 0.0
          max_value: 150.0

    on_value:
      then:
        - sensor.template.publish:
            id: level_in_bags
            state: !lambda 'return id(distance_from_bottom).state;'

  - platform: template
    unit_of_measurement: "cm"
    state_class: measurement
    id: distance_from_top
    name: "Salt Level From Top in CM"
    icon: mdi:arrow-collapse-down
    disabled_by_default: true
    #update_interval: 5s
    filters:
      - lambda: 'return x * 100;'
      - round: 1
      - clamp:
          min_value: 0.0
          max_value: 150.0


  - platform: template
    unit_of_measurement: "bags"
    state_class: measurement
    id: level_in_bags
    name: "Salt Level in Bags"
    icon: mdi:counter
    disabled_by_default: true
    #update_interval: 5s
    filters:
      - lambda: 'return  x / 17.5;'
      - round: 1
      - clamp:
          min_value: 0.0
          max_value: 10.0