fresh-home/esphome/circuit-setup/meter_sensors/6chan_addon1.yaml

# CircuitSetup 6 Channel Energy Meter 1st Add-on board config
# Assumes jumpers are both in the 1st position

sensor:
#IC1 AddOn 1
############
  - platform: atm90e32
    release_device: true
    cs_pin: ${addon1_ic1}
    id: ${addon1_id1}
    phase_a:
      current:
        name: ${ct7_name} ${amp_label}
        id: ct7Amps
      power:
        name: ${ct7_name} ${watt_label}
        id: ct7Watts
        filters:
          - lambda: |-
              if (x < 0) return x * -1;
              return x;
          - or:
              - throttle: 60s
              - delta: 2.0
      gain_voltage: ${voltage_cal1}
      gain_ct: ${current_cal_ct7}
    phase_b:
      current:
        name: ${ct8_name} ${amp_label}
        id: ct8Amps
      power:
        name: ${ct8_name} ${watt_label}
        id: ct8Watts
        filters:
          - lambda: |-
              if (x < 0) return x * -1;
              return x;
          - or:
              - throttle: 60s
              - delta: 2.0
      gain_voltage: ${voltage_cal1}
      gain_ct: ${current_cal_ct8}
    phase_c:
      current:
        name: ${ct9_name} ${amp_label}
        id: ct9Amps
      power:
        name: ${ct9_name} ${watt_label}
        id: ct9Watts
        filters:
          - lambda: |-
              if (x < 0) return x * -1;
              return x;
          - or:
              - throttle: 60s
              - delta: 2.0
      gain_voltage: ${voltage_cal1}
      gain_ct: ${current_cal_ct9}
    line_frequency: ${electric_freq}
    gain_pga: 1X
    update_interval: ${update_time}
    enable_offset_calibration: ${offset_calibration}
    enable_gain_calibration: ${gain_calibration}
#IC2 AddOn 1
############
  - platform: atm90e32
    release_device: true
    cs_pin: ${addon1_ic2}
    id: ${addon1_id2}
    phase_a:
      current:
        name: ${ct10_name} ${amp_label}
        id: ct10Amps
      power:
        name: ${ct10_name} ${watt_label}
        id: ct10Watts
        filters:
          - lambda: |-
              if (x < 0) return x * -1;
              return x;
          - or:
              - throttle: 60s
              - delta: 2.0
      gain_voltage: ${voltage_cal2}
      gain_ct: ${current_cal_ct10}
    phase_b:
      current:
        name: ${ct11_name} ${amp_label}
        id: ct11Amps
      power:
        name: ${ct11_name} ${watt_label}
        id: ct11Watts
        filters:
          - lambda: |-
              if (x < 0) return x * -1;
              return x;
          - or:
              - throttle: 60s
              - delta: 2.0
      gain_voltage: ${voltage_cal2}
      gain_ct: ${current_cal_ct11}
    phase_c:
      current:
        name: ${ct12_name} ${amp_label}
        id: ct12Amps
      power:
        name: ${ct12_name} ${watt_label}
        id: ct12Watts
        filters:
          - lambda: |-
              if (x < 0) return x * -1;
              return x;
          - or:
              - throttle: 60s
              - delta: 2.0
      gain_voltage: ${voltage_cal2}
      gain_ct: ${current_cal_ct12}
    line_frequency: ${electric_freq}
    gain_pga: 1X
    update_interval: ${update_time}
    enable_offset_calibration: ${offset_calibration}
    enable_gain_calibration: ${gain_calibration}

#Total A AddOn1
  - platform: template
    name: Add-on 1 Total ${amp_label}
    id: totalAmpsAddOn1
    lambda: return id(ct7Amps).state + id(ct8Amps).state + id(ct9Amps).state + id(ct10Amps).state + id(ct11Amps).state + id(ct12Amps).state ;
    accuracy_decimals: 2
    unit_of_measurement: A
    device_class: current
    update_interval: ${update_time}

#Total W AddOn1
  - platform: template
    name: Add-on 1 Total ${watt_label}
    id: totalWattsAddOn1
    lambda: return id(ct7Watts).state + id(ct8Watts).state + id(ct9Watts).state + id(ct10Watts).state + id(ct11Watts).state + id(ct12Watts).state ;
    accuracy_decimals: 2
    unit_of_measurement: W
    device_class: power
    update_interval: ${update_time}

  #kWh From CT 7
  - platform: total_daily_energy
    name: ${ct7_name} ${kwh_label}
    id: ct7Kwh
    power_id: ct7Watts
    filters:
      - multiply: 0.001
    unit_of_measurement: kWh
    device_class: energy
    state_class: total_increasing

  # kWh from CT 8
  - platform: total_daily_energy
    name: ${ct8_name} ${kwh_label}
    id: ct8Kwh
    power_id: ct8Watts
    filters:
      - multiply: 0.001
    unit_of_measurement: kWh
    device_class: energy
    state_class: total_increasing

  #kWh From CT 9
  - platform: total_daily_energy
    name: ${ct9_name} ${kwh_label}
    id: ct9Kwh
    power_id: ct9Watts
    filters:
      - multiply: 0.001
    unit_of_measurement: kWh
    device_class: energy
    state_class: total_increasing

  #kWh From CT 10
  - platform: total_daily_energy
    name: ${ct10_name} ${kwh_label}
    id: ct10Kwh
    power_id: ct10Watts
    filters:
      - multiply: 0.001
    unit_of_measurement: kWh
    device_class: energy
    state_class: total_increasing

  #kWh From CT 11
  - platform: total_daily_energy
    name: ${ct11_name} ${kwh_label}
    id: ct11Kwh
    power_id: ct11Watts
    filters:
      - multiply: 0.001
    unit_of_measurement: kWh
    device_class: energy
    state_class: total_increasing

  #kWh From CT 12
  - platform: total_daily_energy
    name: ${ct12_name} ${kwh_label}
    id: ct12Kwh
    power_id: ct12Watts
    filters:
      - multiply: 0.001
    unit_of_measurement: kWh
    device_class: energy
    state_class: total_increasing