fresh-home/esphome/common/hx711_single_verbose.yaml

globals:
  - id: initial_zero
    type: float
    restore_value: yes
    # NOTE: make sure to align this value to the one used in "calibrate_linear" below!
    initial_value: ${loadcell_zero}

  - id: auto_tare_enabled
    type: bool
    restore_value: yes
    initial_value: 'true'

  - id: auto_tare_difference
    type: float
    restore_value: yes
    initial_value: '0'

  - id: occupancy_forced
    type: bool
    restore_value: no
    initial_value: 'false'

sensor:
  - platform: homeassistant
    entity_id: input_number.${entity_name}_occupied
    internal: true
    id: occupied

  - platform: template
    name: "Raw Value"
    lambda: |-
      return id(hx711_value_raw).raw_state;
    unit_of_measurement: w
    update_interval: 1s
    state_class: measurement
    filters:
      - or:
          - throttle: 60s
          - delta: 1000

  - platform: template
    name: "Auto Tare"
    lambda: |-
      return id(auto_tare_difference);
    unit_of_measurement: w
    update_interval: 1s
    state_class: measurement
    filters:
      - or:
          - throttle: 60s
          - delta: 1000

  - platform: template
    name: "Initial Zero"
    internal: true
    lambda: |-
      return id(initial_zero);
    unit_of_measurement: w
    state_class: measurement
    update_interval: 60s

  # RAW Scale input
  - platform: hx711
    id: hx711_value_raw
    internal: True
    dout_pin: ${dout_pin}
    clk_pin: ${clk_pin}
    gain: 128
    accuracy_decimals: 3
    update_interval: 0.2s
    filters:
      - lambda: !lambda |-
          if (x > 8388000.0) return {};
          if (x < -8388000.0) return {};
          return x;
      - sliding_window_moving_average:
          window_size: 15
          send_every: 15
    on_value:
      then:
        - sensor.template.publish:
            id: hx711_value
            state: !lambda 'return id(hx711_value_raw).state;'
        - if:
            condition:
              and:
                - lambda: 'return id(auto_tare_enabled);'
              # current smart scale value is below approx. 10KG (raw value -375000 aka nobody is standing on the scale
                - lambda: 'return id(hx711_value).state < 10.0;'
            then:
              - if:
                  condition:
                    # current raw scale value is below expected zero value
                    - lambda: 'return id(hx711_value_raw).state < (id(initial_zero) - id(auto_tare_difference));'
                  then:
                    # INcrease Auto-Tare offset to slowly align real zero value with expected zero value
                    - lambda: |-
                        id(auto_tare_difference) += 10;
                  else:
                    # DEcrease Auto-Tare offset to slowly align real zero value with expected zero value
                    - lambda: |-
                        id(auto_tare_difference) -= 10;

  # Mapped value to lbs
  - platform: template
    id: hx711_value
    name: "Weight"
    internal: False
    filters:
      # apply auto_tare difference
      - lambda: 'return x + id(auto_tare_difference);'
      # apply rough calibration
      - calibrate_linear:
          # retrieve these values by evaluating the raw values with loads of known mass.
          # note that a bigger difference between measurements usually results in higher resolution,
          # so measure 0 Kg and the highest known mass you have (like f.ex. your own weight, measured by a normal scale with good accuracy)
          # 1221300 difference between the two
          # was at -23800 for the longest time
          - ${loadcell_zero} -> 0
          - ${loadcell_load} -> ${loadcell_weight}
      # map values below 0.1 to 0 (to decrease value changes due to random fluctuation)
      - lambda: |-
          if (x <= 0.1 || id(hx711_error).state) {
            return 0.0;
          } else {
            return x;
          }
      - or:
          - throttle: 60s
          - delta: 1

    unit_of_measurement: lbs
    accuracy_decimals: 0
    update_interval: 0.5s
    state_class: measurement

binary_sensor:
  - platform: template
    device_class: occupancy
    name: "Occupied"
    icon: mdi:bed
    lambda: |-
      if (
          id(hx711_value).state >= id(occupied).state || id(occupancy_forced)
          ) {
        return true;
      } else {
        return false;
      }

  - platform: template
    name: "HX711 Error"
    id: hx711_error
    device_class: problem
    lambda: |-
      if (
          id(hx711_value_raw).raw_state > 8388000.0 || id(hx711_value_raw).raw_state < -8388000.0
          ) {
        return true;
      } else {
        return false;
      }

switch:
  - platform: template
    id: force_occupancy
    name: "Force Occupancy"
    lambda: |-
      return id(occupancy_forced);
    turn_on_action:
      - lambda: |-
          id(occupancy_forced) = true;
    turn_off_action:
      - lambda: |-
          id(occupancy_forced) = false;

  - platform: template
    id: auto_tare
    # optimistic: true
    # assumed_state: true
    name: "Auto Tare"
    lambda: |-
      return id(auto_tare_enabled);
    turn_on_action:
      - lambda: |-
          id(auto_tare_enabled) = true;
    turn_off_action:
      - lambda: |-
          id(auto_tare_enabled) = false;

button:
  - platform: template
    id: manual_tare
    name: "Manual Tare"
    on_press:
      - lambda: |-
          id(auto_tare_difference) = id(initial_zero) - id(hx711_value_raw).state;

  - platform: template
    id: reset_tare
    name: "Reset Tare"
    on_press:
      - lambda: |-
          id(auto_tare_difference) = 0;