# 3v3 en svp sun 34 35 32 33 25 26 27 14 12 gnd 13 sd2 sd3 gnd 5v
substitutions:
  devicename: hvac-multisensor
  entity_name: hvac_multisensor
  friendly_name: HVAC MultiSensor
  comment: Clever MultiSensor
  platform: ESP8266
  board: d1_mini
  #variant: esp32
  # framework: esp-idf
  #framework: arduino
  static_ip: !secret hvac-multisensor-ip

packages:
  network: !include common/wifi.yaml
  device_base: !include common/device_base.yaml

esphome:
  name: ${devicename}
  friendly_name: ${friendly_name}
  name_add_mac_suffix: false

esp8266:
  board: ${board}

# Enable logging
logger:
  #level: VERBOSE


one_wire:
  - platform: gpio
    pin: D5

sensor:
  - platform: dallas_temp
    address: 0x5a3c01d6078a2e28
    name: "Probe 1"
    id: probe1
    icon: mdi:thermostat
    update_interval: 10s
    filters:
      - lambda: |-
          float val = x;
          if (isnan(val)) {
            val = 0.0;
          }
          return val * (9.0/5.0) + 32.0;
      - clamp:
          min_value: 0.0
          max_value: 150.0
      - or:
        - throttle: 60s
        - delta: 1.0
    unit_of_measurement: "°F"
    state_class: measurement

  - platform: dallas_temp
    address: 0x6b3c01d6077bbb28
    name: "Probe 2"
    id: probe2
    icon: mdi:thermostat
    update_interval: 10s
    filters:
      - lambda: return x * (9.0/5.0) + 32.0;
      - clamp:
          min_value: 0.0
          max_value: 150.0
      - or:
        - throttle: 60s
        - delta: 1.0
    unit_of_measurement: "°F"
    state_class: measurement

  - platform: dallas_temp
    address: 0x2a3c01d6073e0728
    name: "Probe 3"
    id: probe3
    icon: mdi:thermostat
    update_interval: 10s
    filters:
      - lambda: return x * (9.0/5.0) + 32.0;
      - clamp:
          min_value: 0.0
          max_value: 150.0
      - or:
        - throttle: 60s
        - delta: 1.0
    unit_of_measurement: "°F"
    state_class: measurement

  - platform: template
    name: "Delta"
    id: hvac_delta
    icon: mdi:thermometer-lines
    lambda: |-
      return round( (id(probe1).state - id(probe2).state) * 100.0) / 100.0;
    update_interval: 10s
    unit_of_measurement: "°F"
    state_class: measurement
    device_class: ""
    accuracy_decimals: 1
    filters:
      #- lambda: 'return round( (id(probe1).state - id(probe2).state) * 100.0) / 100.0;'
      - clamp:
          min_value: -100.0
          max_value: 100.0
      - or:
        - throttle: 60s
        - delta: 1.0