# CircuitSetup 6 Channel Energy Meter 6th Add-on board config
# Assumes jumpers are both in the 6th position

sensor:
#IC1 AddOn 6
############
  - platform: atm90e32
    release_device: true
    cs_pin: 15
    id: ${addon6_id1}
    phase_a:
      current:
        name: ${ct37_name} Amps
        id: ct37Amps
      power:
        name: ${ct37_name} Watts
        id: ct37Watts
      gain_voltage: ${voltage_cal1}
      gain_ct: ${current_cal_ct37}
    phase_b:
      current:
        name: ${ct38_name} Amps
        id: ct38Amps
      power:
        name: ${ct38_name} Watts
        id: ct38Watts
      gain_voltage: ${voltage_cal1}
      gain_ct: ${current_cal_ct38}
    phase_c:
      current:
        name: ${ct39_name} Amps
        id: ct39Amps
      power:
        name: ${ct39_name} Watts
        id: ct39Watts
      gain_voltage: ${voltage_cal1}
      gain_ct: ${current_cal_ct39}
    line_frequency: ${electric_freq}
    gain_pga: 1X
    update_interval: ${update_time}
    enable_offset_calibration: ${offset_calibration}
    enable_gain_calibration: ${gain_calibration}
#IC2 AddOn 6
############
  - platform: atm90e32
    release_device: true
    cs_pin: 26
    id: ${addon6_id2}
    phase_a:
      current:
        name: ${ct40_name} Amps
        id: ct40Amps
      power:
        name: ${ct40_name} Watts
        id: ct40Watts
      gain_voltage: ${voltage_cal2}
      gain_ct: ${current_cal_ct40}
    phase_b:
      current:
        name: ${ct41_name} Amps
        id: ct41Amps
      power:
        name: ${ct41_name} Watts
        id: ct41Watts
      gain_voltage: ${voltage_cal2}
      gain_ct: ${current_cal_ct41}
    phase_c:
      current:
        name: ${ct42_name} Amps
        id: ct42Amps
      power:
        name: ${ct42_name} Watts
        id: ct42Watts
      gain_voltage: ${voltage_cal2}
      gain_ct: ${current_cal_ct42}
    line_frequency: ${electric_freq}
    gain_pga: 1X
    update_interval: ${update_time}
    enable_offset_calibration: ${offset_calibration}
    enable_gain_calibration: ${gain_calibration}

#Total Amps AddOn6
  - platform: template
    name: ${friendly_name} Total Amps Add-on6
    id: totalAmpsAddOn6
    lambda: return id(ct37Amps).state + id(ct38Amps).state + id(ct39Amps).state + id(ct40Amps).state + id(ct41Amps).state + id(ct42Amps).state ;
    accuracy_decimals: 2
    unit_of_measurement: A
    device_class: current
    update_interval: ${update_time}

#Total Watts AddOn6
  - platform: template
    name: ${friendly_name} Total Watts Add-on6
    id: totalWattsAddOn6
    lambda: return id(ct37Watts).state + id(ct38Watts).state + id(ct39Watts).state + id(ct40Watts).state + id(ct41Watts).state + id(ct42Watts).state ;
    accuracy_decimals: 2
    unit_of_measurement: W
    device_class: power
    update_interval: ${update_time}