# CircuitSetup 6 Channel Energy Meter 4th Add-on board config
# Assumes jumpers are both in the 4th position

sensor:
#IC1 AddOn 4
############
  - platform: atm90e32
    release_device: true
    cs_pin: 13
    id: ${addon4_id1}
    phase_a:
      current:
        name: ${ct25_name} Amps
        id: ct25Amps
      power:
        name: ${ct25_name} Watts
        id: ct25Watts
      gain_voltage: ${voltage_cal1}
      gain_ct: ${current_cal_ct25}
    phase_b:
      current:
        name: ${ct26_name} Amps
        id: ct26Amps
      power:
        name: ${ct26_name} Watts
        id: ct26Watts
      gain_voltage: ${voltage_cal1}
      gain_ct: ${current_cal_ct26}
    phase_c:
      current:
        name: ${ct27_name} Amps
        id: ct27Amps
      power:
        name: ${ct27_name} Watts
        id: ct27Watts
      gain_voltage: ${voltage_cal1}
      gain_ct: ${current_cal_ct27}
    line_frequency: ${electric_freq}
    gain_pga: 1X
    update_interval: ${update_time}
    enable_offset_calibration: ${offset_calibration}
    enable_gain_calibration: ${gain_calibration}
#IC2 AddOn 4
############
  - platform: atm90e32
    release_device: true
    cs_pin: 22
    id: ${addon4_id2}
    phase_a:
      current:
        name: ${ct28_name} Amps
        id: ct28Amps
      power:
        name: ${ct28_name} Watts
        id: ct28Watts
      gain_voltage: ${voltage_cal2}
      gain_ct: ${current_cal_ct28}
    phase_b:
      current:
        name: ${ct29_name} Amps
        id: ct29Amps
      power:
        name: ${ct29_name} Watts
        id: ct29Watts
      gain_voltage: ${voltage_cal2}
      gain_ct: ${current_cal_ct29}
    phase_c:
      current:
        name: ${ct30_name} Amps
        id: ct30Amps
      power:
        name: ${ct30_name} Watts
        id: ct30Watts
      gain_voltage: ${voltage_cal2}
      gain_ct: ${current_cal_ct30}
    line_frequency: ${electric_freq}
    gain_pga: 1X
    update_interval: ${update_time}
    enable_offset_calibration: ${offset_calibration}
    enable_gain_calibration: ${gain_calibration}

#Total Amps AddOn4
  - platform: template
    name: ${friendly_name} Total Amps Add-on4
    id: totalAmpsAddOn4
    lambda: return id(ct25Amps).state + id(ct26Amps).state + id(ct27Amps).state + id(ct28Amps).state + id(ct29Amps).state + id(ct30Amps).state ;
    accuracy_decimals: 2
    unit_of_measurement: A
    device_class: current
    update_interval: ${update_time}

#Total Watts AddOn4
  - platform: template
    name: ${friendly_name} Total Watts Add-on4
    id: totalWattsAddOn4
    lambda: return id(ct25Watts).state + id(ct26Watts).state + id(ct27Watts).state + id(ct28Watts).state + id(ct29Watts).state + id(ct30Watts).state ;
    accuracy_decimals: 2
    unit_of_measurement: W
    device_class: power
    update_interval: ${update_time}