esphome:
  name: test-device-1
  friendly_name: Test Device 1

esp32:
  board: esp32dev
  framework:
    type: esp-idf

# Enable logging
logger:

# Enable Home Assistant API
api:
  encryption:
    key: "PySr6PXZw6crnoT/oQJC3hYyVnPlXi2OwF8CAuA1d1U="

ota:
  - platform: esphome
    password: "d9ccd2607c37bc67061f8f76971ec953"

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Test-Device-1 Fallback Hotspot"
    password: "ELfuAtKmRwOC"

# For Ultrasonic Sensor
#  trigger_pin: GPIO13
#  echo_pin: GPIO14

captive_portal:

i2c:
  - id: bus_a
    sda: 21
    scl: 22
    scan: true

  - id: bus_b
    sda: 32
    scl: 33
    scan: true

sensor:
  - platform: ultrasonic
    update_interval: 1s
    trigger_pin: GPIO13
    echo_pin: GPIO14
    name: "Ultrasonic Sensor"

  # - platform: bme280_i2c
  #   i2c_id: bus_a
  #   address: 0x76
  #   update_interval: 10s
  #   temperature:
  #     name: "BME280 76A Temperature"
  #   pressure:
  #     name: "BME280 76A Pressure"
  #   humidity:
  #     name: "BME280 76A Humidity"

  # - platform: bme280_i2c
  #   i2c_id: bus_b
  #   address: 0x76
  #   update_interval: 10s
  #   temperature:
  #     name: "BME280 76B Temperature"
  #   pressure:
  #     name: "BME280 76B Pressure"
  #   humidity:
  #     name: "BME280 76B Humidity"

  - platform: bme680
    i2c_id: bus_a
    temperature:
      name: "BME680 Temperature"
      oversampling: 16x
    pressure:
      name: "BME680 Pressure"
    humidity:
      id: "humidity"
      name: "BME680 Humidity"
    gas_resistance:
      id: "gas_resistance"
      name: "BME680 Gas Resistance"
    address: 0x77
    update_interval: 60s
  - platform: template
    name: "BME680 Indoor Air Quality"
    id: iaq
    icon: "mdi:gauge"
    # calculation: comp_gas = log(R_gas[ohm]) + 0.04 log(Ohm)/%rh * hum[%rh]
    lambda: |-
      return log(id(gas_resistance).state) + 0.04 *  id(humidity).state;
    state_class: "measurement"


text_sensor:
  - platform: template
    name: "BME680 IAQ Classification"
    icon: "mdi:checkbox-marked-circle-outline"
    lambda: |-
      if (int(id(iaq).state) <= 50) {
        return {"Excellent"};
      }
      else if (int(id(iaq).state) <= 100) {
        return {"Good"};
      }
      else if (int(id(iaq).state) <= 150) {
        return {"Lightly polluted"};
      }
      else if (int(id(iaq).state) <= 200) {
        return {"Moderately polluted"};
      }
      else if (int(id(iaq).state) <= 250) {
        return {"Heavily polluted"};
      }
      else if (int(id(iaq).state) <= 350) {
        return {"Severely polluted"};
      }
      else if (int(id(iaq).state) <= 500) {
        return {"Extremely polluted"};
      }
      else {
        return {"unknown"};
      }


esp32_touch:


binary_sensor:
  - platform: gpio
    name: "Door"
    device_class: door
    pin:
      number: 16
      mode: INPUT_PULLUP
      inverted: True

  - platform: gpio
    #threshold: 1000
    name: "Moisture"
    device_class: moisture
    pin:
      number: 12
      mode: INPUT_PULLUP
      inverted: True

  # - platform: esp32_touch
  #   threshold: 1000
  #   name: "Moisture"
  #   device_class: moisture
  #   pin: 14