# DFRobot Connector (top)
# [1][2][3][4][5][6]

# 1:	5V
# 2:	GND
# 3:	GPIO19 / pin38
# 4:	GPIO18 / pin35
# 5:	GPIO17 / pin27  < in use by LD2450  |  UART TX
# 6:	GPIO16 / pin25  < in use by LD2450  |  UART RX

# LD2410 connector (bottom)
# [1][2][3][4][5]

# 1:	GPIO16 / pin25
# 2:	GPIO17 / pin27
# 3:	GPIO18 / pin35
# 4:	GND
# 5:	5V

# Debug connector (next to 5V connector)
# [1][2][3]
# [4][5][6]

# 1:	GPIO32 / pin12
# 2:	GPIO26 / pin15
# 3:	3.3V
# 4:	GPIO25 / pin14
# 5:	GPIO27 / pin16
# 6:	GND


# i2c:
#   - id: bus_b
#     sda: 26
#     scl: 27
#     scan: true

# sensor:
#   - platform: scd4x
#     i2c_id: bus_b
#     id: scd40
#     measurement_mode: low_power_periodic
#     co2:
#       name: "CO2"
#       id: "co2"
#       filters:
#         - or:
#           - delta: 5%
#           - delta: 5
#     automatic_self_calibration: false



substitutions:
  name: everything-presence-lite-8fa4fc
  devicename: everything-presence-lite-8fa4fc
  friendly_name: Everything Presence Great Room
  static_ip: !secret everything-presence-great-room-ip
  comment: Great Room Presence

packages:
  base: !include common/device_base.yaml
  network: !include common/wifi.yaml
  EverythingSmartTechnology.Everything_Presence_Lite: github://everythingsmarthome/everything-presence-lite/everything-presence-lite-ha.yaml@main

ota:
  - id: !remove ota_esphome

captive_portal:

esphome:
  name: ${name}
  name_add_mac_suffix: false
  friendly_name: ${friendly_name}

# sensor:
#   - platform: bme280_i2c
#     i2c_id: bus_b
#     # address: 0x76
#     update_interval: 10s
#     temperature:
#       name: "Temperature"
#     pressure:
#       name: "Pressure"
#     humidity:
#       name: "Humidity"