# CircuitSetup 6 Channel Energy Meter 5th Add-on board config
# Assumes jumpers are both in the 5th position

sensor:
#IC1 AddOn 5
############
  - platform: atm90e32
    release_device: true
    cs_pin: 14
    id: ${addon5_id1}
    phase_a:
      current:
        name: ${ct31_name} Amps
        id: ct31Amps
      power:
        name: ${ct31_name} Watts
        id: ct31Watts
      gain_voltage: ${voltage_cal1}
      gain_ct: ${current_cal_ct31}
    phase_b:
      current:
        name: ${ct32_name} Amps
        id: ct32Amps
      power:
        name: ${ct32_name} Watts
        id: ct32Watts
      gain_voltage: ${voltage_cal1}
      gain_ct: ${current_cal_ct32}
    phase_c:
      current:
        name: ${ct33_name} Amps
        id: ct33Amps
      power:
        name: ${ct33_name} Watts
        id: ct33Watts
      gain_voltage: ${voltage_cal1}
      gain_ct: ${current_cal_ct33}
    line_frequency: ${electric_freq}
    gain_pga: 1X
    update_interval: ${update_time}
    enable_offset_calibration: ${offset_calibration}
    enable_gain_calibration: ${gain_calibration}
#IC2 AddOn 5
############
  - platform: atm90e32
    release_device: true
    cs_pin: 25
    id: ${addon5_id2}
    phase_a:
      current:
        name: ${ct34_name} Amps
        id: ct34Amps
      power:
        name: ${ct34_name} Watts
        id: ct34Watts
      gain_voltage: ${voltage_cal2}
      gain_ct: ${current_cal_ct34}
    phase_b:
      current:
        name: ${ct35_name} Amps
        id: ct35Amps
      power:
        name: ${ct35_name} Watts
        id: ct35Watts
      gain_voltage: ${voltage_cal2}
      gain_ct: ${current_cal_ct35}
    phase_c:
      current:
        name: ${ct36_name} Amps
        id: ct36Amps
      power:
        name: ${ct36_name} Watts
        id: ct36Watts
      gain_voltage: ${voltage_cal2}
      gain_ct: ${current_cal_ct36}
    line_frequency: ${electric_freq}
    gain_pga: 1X
    update_interval: ${update_time}
    enable_offset_calibration: ${offset_calibration}
    enable_gain_calibration: ${gain_calibration}

#Total Amps AddOn5
  - platform: template
    name: ${friendly_name} Total Amps Add-on5
    id: totalAmpsAddOn5
    lambda: return id(ct31Amps).state + id(ct32Amps).state + id(ct33Amps).state + id(ct34Amps).state + id(ct35Amps).state + id(ct36Amps).state ;
    accuracy_decimals: 2
    unit_of_measurement: A
    device_class: current
    update_interval: ${update_time}

#Total Watts AddOn5
  - platform: template
    name: ${friendly_name} Total Watts Add-on5
    id: totalWattsAddOn5
    lambda: return id(ct31Watts).state + id(ct32Watts).state + id(ct33Watts).state + id(ct34Watts).state + id(ct35Watts).state + id(ct36Watts).state ;
    accuracy_decimals: 2
    unit_of_measurement: W
    device_class: power
    update_interval: ${update_time}