# CircuitSetup 6 Channel Energy Meter 1st Add-on board config
# Assumes jumpers are both in the 1st position

sensor:
#IC1 AddOn 1
############
  - platform: atm90e32
    release_device: true
    cs_pin: 0
    id: ${addon1_id1}
    phase_a:
      current:
        name: ${ct7_name} Amps
        id: ct7Amps
      power:
        name: ${ct7_name} Watts
        id: ct7Watts
      gain_voltage: ${voltage_cal1}
      gain_ct: ${current_cal_ct7}
    phase_b:
      current:
        name: ${ct8_name} Amps
        id: ct8Amps
      power:
        name: ${ct8_name} Watts
        id: ct8Watts
      gain_voltage: ${voltage_cal1}
      gain_ct: ${current_cal_ct8}
    phase_c:
      current:
        name: ${ct9_name} Amps
        id: ct9Amps
      power:
        name: ${ct9_name} Watts
        id: ct9Watts
      gain_voltage: ${voltage_cal1}
      gain_ct: ${current_cal_ct9}
    line_frequency: ${electric_freq}
    gain_pga: 1X
    update_interval: ${update_time}
    enable_offset_calibration: ${offset_calibration}
    enable_gain_calibration: ${gain_calibration}
#IC2 AddOn 1
############
  - platform: atm90e32
    release_device: true
    cs_pin: 16
    id: ${addon1_id2}
    phase_a:
      current:
        name: ${ct10_name} Amps
        id: ct10Amps
      power:
        name: ${ct10_name} Watts
        id: ct10Watts
      gain_voltage: ${voltage_cal2}
      gain_ct: ${current_cal_ct10}
    phase_b:
      current:
        name: ${ct11_name} Amps
        id: ct11Amps
      power:
        name: ${ct11_name} Watts
        id: ct11Watts
      gain_voltage: ${voltage_cal2}
      gain_ct: ${current_cal_ct11}
    phase_c:
      current:
        name: ${ct12_name} Amps
        id: ct12Amps
      power:
        name: ${ct12_name} Watts
        id: ct12Watts
      gain_voltage: ${voltage_cal2}
      gain_ct: ${current_cal_ct12}
    line_frequency: ${electric_freq}
    gain_pga: 1X
    update_interval: ${update_time}
    enable_offset_calibration: ${offset_calibration}
    enable_gain_calibration: ${gain_calibration}

#Total Amps AddOn1
  - platform: template
    name: ${friendly_name} Total Amps Add-on1
    id: totalAmpsAddOn1
    lambda: return id(ct7Amps).state + id(ct8Amps).state + id(ct9Amps).state + id(ct10Amps).state + id(ct11Amps).state + id(ct12Amps).state ;
    accuracy_decimals: 2
    unit_of_measurement: A
    device_class: current
    update_interval: ${update_time}

#Total Watts AddOn1
  - platform: template
    name: ${friendly_name} Total Watts Add-on1
    id: totalWattsAddOn1
    lambda: return id(ct7Watts).state + id(ct8Watts).state + id(ct9Watts).state + id(ct10Watts).state + id(ct11Watts).state + id(ct12Watts).state ;
    accuracy_decimals: 2
    unit_of_measurement: W
    device_class: power
    update_interval: ${update_time}