# CircuitSetup 6 Channel Energy Meter Main Board + 5 Add-on Boards config
# See all options at https://esphome.io/components/sensor/atm90e32.html

substitutions:
# Change the disp_name to something you want
  disp_name: energy-meter
  friendly_name: CircuitSetup Energy Meter 36x
# Interval of how often the power data is updated
  update_time: 10s
# Frequency of your electrical grid - 60Hz in North America, 50Hz otherwise
  electric_freq: "60Hz"

## The below names and IDs can be changed to whatever you want. IDs should not have spaces
## Main board
  main_meter_name1: Meter 1-3
  main_meter_name2: Meter 4-6
  main_meter_id1: meter_main1
  main_meter_id2: meter_main2
  ct1_name: CT1
  ct2_name: CT2
  ct3_name: CT3
  ct4_name: CT4
  ct5_name: CT5
  ct6_name: CT6
## Addon1
  addon1_name1: Addon1 7-9
  addon1_name2: Addon1 10-12
  addon1_id1: addon1_1
  addon1_id2: addon1_2
  ct7_name: CT7
  ct8_name: CT8
  ct9_name: CT9
  ct10_name: CT10
  ct11_name: CT11
  ct12_name: CT12
## Addon2
  addon2_name1: Addon2 13-15
  addon2_name2: Addon2 16-18
  addon2_id1: addon2_1
  addon2_id2: addon2_2
  ct13_name: CT13
  ct14_name: CT14
  ct15_name: CT15
  ct16_name: CT16
  ct17_name: CT17
  ct18_name: CT18
## Addon3
  addon3_name1: Addon3 19-21
  addon3_name2: Addon3 22-24
  addon3_id1: addon3_1
  addon3_id2: addon3_2
  ct19_name: CT19
  ct20_name: CT20
  ct21_name: CT21
  ct22_name: CT22
  ct23_name: CT23
  ct24_name: CT24
## Addon4
  addon4_name1: Addon4 25-27
  addon4_name2: Addon4 28-30
  addon4_id1: addon4_1
  addon4_id2: addon4_2
  ct25_name: CT25
  ct26_name: CT26
  ct27_name: CT27
  ct28_name: CT28
  ct29_name: CT29
  ct30_name: CT30
## Addon5
  addon5_name1: Addon5 31-33
  addon5_name2: Addon5 34-36
  addon5_id1: addon5_1
  addon5_id2: addon5_2
  ct31_name: CT31
  ct32_name: CT32
  ct33_name: CT33
  ct34_name: CT34
  ct35_name: CT35
  ct36_name: CT36

## Semi-Automatic Calibration ##
# See https://esphome.io/components/sensor/atm90e32.html#calibration
# WHEN CALIBRATION IS ENABLED, calculated values for offset and gain stored in memory take priority over config values
# To save calculated calibration values, copy them from the logs to your config
# then use the clear buttons to clear the calibration values from memory
# Values are stored in the variables for gain below and offsets in their corresponding files
# under /calibration/6chan_xxxx_offset_calibrations.yaml
  offset_calibration: "true"
  gain_calibration: "true"

## Gain Calibration Values ##
# Change current_cal_ctX value to the corresponding CT's that you're using
# For more precise calibration, see documentation for Semi-Auto calibration
# Current Transformers:
#  20A/25mA SCT-006: 11143
#  30A/1V SCT-013-030: 8650
#  50A/1V SCT-013-050: 15420
#  50A/16.6mA SCT-010: 41334
#  80A/26.6mA SCT-010: 41660
#  100A/50ma SCT-013-000: 27518
#  120A/40mA: SCT-016: 41787
#  200A/100mA SCT-024: 27518
#  200A/50mA SCT-024: 55036

## Main Board
  current_cal_ct1: '27518'
  current_cal_ct2: '27518'
  current_cal_ct3: '27518'
  current_cal_ct4: '27518'
  current_cal_ct5: '27518'
  current_cal_ct6: '27518'
## Addon1
  current_cal_ct7: '27518'
  current_cal_ct8: '27518'
  current_cal_ct9: '27518'
  current_cal_ct10: '27518'
  current_cal_ct11: '27518'
  current_cal_ct12: '27518'
## Addon2
  current_cal_ct13: '27518'
  current_cal_ct14: '27518'
  current_cal_ct15: '27518'
  current_cal_ct16: '27518'
  current_cal_ct17: '27518'
  current_cal_ct18: '27518'
## Addon3
  current_cal_ct19: '27518'
  current_cal_ct20: '27518'
  current_cal_ct21: '27518'
  current_cal_ct22: '27518'
  current_cal_ct23: '27518'
  current_cal_ct24: '27518'
## Addon4
  current_cal_ct25: '27518'
  current_cal_ct26: '27518'
  current_cal_ct27: '27518'
  current_cal_ct28: '27518'
  current_cal_ct29: '27518'
  current_cal_ct30: '27518'
## Addon4
  current_cal_ct31: '27518'
  current_cal_ct32: '27518'
  current_cal_ct33: '27518'
  current_cal_ct34: '27518'
  current_cal_ct35: '27518'
  current_cal_ct36: '27518'
# This only needs to be changed if you're using something other than the  
# Jameco 9VAC Transformer: 
  voltage_cal1: '7305'
  voltage_cal2: '7305'

esphome:
  name: ${disp_name}
  friendly_name: "${friendly_name}"
  name_add_mac_suffix: true
  min_version: '2025.7.0'
  project:
    name: circuitsetup.6c-energy-meter-5-addons
    version: "1.7"

packages:
  remote_package:
    url: https://github.com/CircuitSetup/Expandable-6-Channel-ESP32-Energy-Meter
    ref: master
    refresh: 1d
    files:
      - Software/ESPHome/6chan_common.yaml
      - Software/ESPHome/meter_sensors/6chan_main_sensor.yaml
      - Software/ESPHome/meter_sensors/6chan_addon1.yaml
      - Software/ESPHome/meter_sensors/6chan_addon2.yaml
      - Software/ESPHome/meter_sensors/6chan_addon3.yaml
      - Software/ESPHome/meter_sensors/6chan_addon4.yaml
      - Software/ESPHome/meter_sensors/6chan_addon5.yaml

      ## Additional power quality sensors per CT/Phase
      ## Uncomment to enable
      ## Details: https://esphome.io/components/sensor/atm90e32.html#configuration-variables
      #- Software/ESPHome/power_quality/6chan_main_power_quality.yaml
      #- Software/ESPHome/power_quality/6chan_addon1_power_quality.yaml
      #- Software/ESPHome/power_quality/6chan_addon2_power_quality.yaml
      #- Software/ESPHome/power_quality/6chan_addon3_power_quality.yaml
      #- Software/ESPHome/power_quality/6chan_addon4_power_quality.yaml
      #- Software/ESPHome/power_quality/6chan_addon5_power_quality.yaml
      
      ## Enables text status fields for each CT/Phase
      ## Uncomment to enable
      ## Details: https://esphome.io/components/sensor/atm90e32.html#text-sensor
      - Software/ESPHome/status_fields/6chan_main_status.yaml
      #- Software/ESPHome/status_fields/6chan_addon1_status.yaml
      #- Software/ESPHome/status_fields/6chan_addon2_status.yaml
      #- Software/ESPHome/status_fields/6chan_addon3_status.yaml
      #- Software/ESPHome/status_fields/6chan_addon4_status.yaml
      #- Software/ESPHome/status_fields/6chan_addon5_status.yaml
      
      ## Adds semi-automatic calibration buttons and reference fields 
      ## If enabled, make sure offset & gain calibration are set to "true" above
      ## Uncomment to enable
      ## Details: https://esphome.io/components/sensor/atm90e32.html#calibration
      - Software/ESPHome/calibration/6chan_main_calibration.yaml
      #- Software/ESPHome/calibration/6chan_addon1_calibration.yaml
      #- Software/ESPHome/calibration/6chan_addon2_calibration.yaml
      #- Software/ESPHome/calibration/6chan_addon3_calibration.yaml
      #- Software/ESPHome/calibration/6chan_addon4_calibration.yaml
      #- Software/ESPHome/calibration/6chan_addon5_calibration.yaml
      
      ## Additional offset calibration fields that should be copied per CT/Phase from the ESPHome logs
      ## These do not need to be set unless you are seeing non-zero values when CTs or Voltage 
      ## should not be registering anything.
      #- Software/ESPHome/calibration/6chan_main_offset_calibrations.yaml
      #- Software/ESPHome/calibration/6chan_addon1_offset_calibrations.yaml
      #- Software/ESPHome/calibration/6chan_addon2_offset_calibrations.yaml
      #- Software/ESPHome/calibration/6chan_addon3_offset_calibrations.yaml
      #- Software/ESPHome/calibration/6chan_addon4_offset_calibrations.yaml
      #- Software/ESPHome/calibration/6chan_addon5_offset_calibrations.yaml

dashboard_import:
  package_import_url: github://CircuitSetup/Expandable-6-Channel-ESP32-Energy-Meter/Software/ESPHome/6chan_energy_meter_5-addons.yaml@master
  import_full_config: true

# Enable Home Assistant API
# An encryption key is recommended and can be generated here:
# https://esphome.io/components/api.html#configuration-variables
api:
#  encryption:
#    key: "YOUR_ENCRYPTION_KEY_HERE"

# Enable OTA updating
ota:
  - platform: esphome

# Set up a wifi access point
wifi:
  ap:

# In combination with the `ap` this allows 
# provisioning wifi credentials to the device.
captive_portal:

# Sets up Bluetooth LE to provision wifi credentials 
# to the device.
esp32_improv:
  authorizer: none

# Sets up the improv via serial client for wifi provisioning
improv_serial:

web_server:
  port: 80

sensor:
## The max value for current that the meter can output is 65.535. If you expect to measure current over 65A,
## divide the current_cal_ctx (above) by 2 (120A CT) or 4 (200A CT) and multiply the current and power values 
## by 2 or 4, uncommenting the below and changing the id and phase_x accordingly
#- id: !extend ${main_meter_id1} # CTs 1-3 
#  phase_a: # CT1
#    current:
#      filters:
#        - multiply: 2
#    power:
#      filters:
#        - multiply: 2
#
## uncomment if monitoring 2 voltages
#- id: !extend ${main_meter_id2}
#  phase_a:
#    voltage:
#       name: Voltage 2
#       id: ic2Volts
#       accuracy_decimals: 1
#  frequency:
#    name: Frequency 2

## Comment out to show amps and watts per meter board in Home Assistant
- id: !extend totalAmpsMain
  internal: true
- id: !extend totalWattsMain
  internal: true
- id: !extend totalAmpsAddOn1
  internal: true
- id: !extend totalWattsAddOn1
  internal: true
- id: !extend totalAmpsAddOn2
  internal: true
- id: !extend totalWattsAddOn2
  internal: true
- id: !extend totalAmpsAddOn3
  internal: true
- id: !extend totalWattsAddOn3
  internal: true
- id: !extend totalAmpsAddOn4
  internal: true
- id: !extend totalWattsAddOn4
  internal: true
- id: !extend totalAmpsAddOn5
  internal: true
- id: !extend totalWattsAddOn5
  internal: true

#Total Amps
###########
- platform: template
  name: ${friendly_name} Total Amps
  id: totalAmps
  lambda: return id(totalAmpsMain).state + id(totalAmpsAddOn1).state + id(totalAmpsAddOn2).state + id(totalAmpsAddOn3).state + id(totalAmpsAddOn4).state + id(totalAmpsAddOn5).state;
  accuracy_decimals: 2
  unit_of_measurement: A
  device_class: current
  update_interval: ${update_time}
   
#Total Watts
############
- platform: template
  name: ${friendly_name} Total Watts
  id: totalWatts
  lambda: return id(totalWattsMain).state + id(totalWattsAddOn1).state + id(totalWattsAddOn2).state + id(totalWattsAddOn3).state + id(totalWattsAddOn4).state + id(totalWattsAddOn5).state;
  accuracy_decimals: 1
  unit_of_measurement: W
  device_class: power
  update_interval: ${update_time}
    
#kWh
####
- platform: total_daily_energy
  name: ${friendly_name} Total kWh
  power_id: totalWatts
  filters:
    - multiply: 0.001
  unit_of_measurement: kWh
  device_class: energy
  state_class: total_increasing