substitutions:
  devicename: utility-room-multisensor
  entity_name: utility_room_multisensor
  friendly_name: Utility Room MultiSensor
  comment: Clever MultiSensor
  platform: ESP8266
  board: nodemcu
  static_ip: !secret utility-room-multisensor-ip

packages:
  network: !include common/wifi.yaml
  device_base: !include common/device_base.yaml

esphome:
  name: ${devicename}
  friendly_name: ${friendly_name}
  name_add_mac_suffix: false

esp8266:
  board: ${board}

# Enable logging
logger:
  #level: VERBOSE

web_server:
  port: 80
  version: 3
  include_internal: True

i2c:
  - id: bus_a
    sda: D6
    scl: D5

bme680_bsec:
    i2c_id: bus_a

        # i2c address
    # -----------
    # Common values are:
    # - 0x76
    # - 0x77
    # Default: 0x76
    address: 0x77

    # Temperature offset
    # ------------------
    # Useful if device is in enclosure and reads too high
    # Default: 0
    temperature_offset: 0

    # IAQ calculation mode
    # --------------------
    # Available options:
    # - static (for fixed position devices)
    # - mobile (for on person or other moveable devices)
    # Default: static
    iaq_mode: static

    # Sample rate
    # -----------
    # This controls the sampling rate for gas-dependant sensors and will govern the interval
    # at which the sensor heater is operated.
    # By default this rate will also be used for temperature, pressure and humidity sensors
    # but these can be overridden on a per-sensor level if required.
    #
    # Available options:
    # - lp (low power - samples every 3 seconds)
    # - ulp (ultra low power - samples every 5 minutes)
    # Default: lp
    sample_rate: lp

    # Interval at which to save BSEC state
    # ------------------------------------
    # Default: 6h
    state_save_interval: 6h

sensor:
  # - platform: bme680
  #   i2c_id: bus_a
  #   address: 0x77
  #   update_interval: 3s
  #   temperature:
  #     name: "Standard Temperature"
  #     oversampling: 16x
  #     device_class: temperature
  #     unit_of_measurement: "°C"
  #     web_server:
  #       sorting_weight: 10
  #   pressure:
  #     name: "Standard Pressure"
  #     device_class: atmospheric_pressure
  #     unit_of_measurement: hPa
  #     web_server:
  #       sorting_weight: 20
  #   humidity:
  #     id: "humidity"
  #     name: "Standard  Humidity"
  #     device_class: humidity
  #     unit_of_measurement: "%"
  #     web_server:
  #       sorting_weight: 30
  #   gas_resistance:
  #     id: "gas_resistance"
  #     name: "Standard Gas Resistance"
  #     unit_of_measurement: "Ω"
  #     web_server:
  #       sorting_weight: 40

  # - platform: template
  #   name: "Standard Indoor Air Quality"
  #   id: iaq
  #   icon: "mdi:gauge"
  #   # calculation: comp_gas = log(R_gas[ohm]) + 0.04 log(Ohm)/%rh * hum[%rh]
  #   lambda: |-
  #     return log(id(gas_resistance).state) + 0.04 *  id(humidity).state;
  #   state_class: "measurement"
  #   web_server:
  #     sorting_weight: 50

  - platform: bme680_bsec
    temperature:
      # Temperature in °C
      name: "Temperature"
      id: temp
      sample_rate: lp
      unit_of_measurement: "°C"
      web_server:
        sorting_weight: 11
      filters:
        - median
    pressure:
      # Pressure in hPa
      name: "Pressure"
      id: pressure
      sample_rate: lp
      unit_of_measurement: "hPa"
      web_server:
        sorting_weight: 21
      filters:
        - median
    humidity:
      # Relative humidity %
      id: humidity
      name: "Relative Humidity"
      sample_rate: lp
      unit_of_measurement: "%"
      web_server:
        sorting_weight: 31
      filters:
        - median
    gas_resistance:
      # Gas resistance in Ω
      name: "Gas Resistance"
      id: gas_resistance
      unit_of_measurement: "Ω"
      disabled_by_default: True
      web_server:
        sorting_weight: 41
      filters:
        - median
    iaq:
      # Indoor air quality value
      name: "Air Quality Index"
      unit_of_measurement: "AQI"
      id: iaq
      web_server:
        sorting_weight: 51
      filters:
        - median
    iaq_accuracy:
      # IAQ accuracy as a numeric value of 0, 1, 2, 3
      name: "Numeric IAQ Accuracy"
      id: iaq_accuracy
      disabled_by_default: True
      web_server:
        sorting_weight: 71
    co2_equivalent:
      # CO2 equivalent estimate in ppm
      name: "CO2 Equivalent"
      id: co2
      unit_of_measurement: "ppm"
      web_server:
        sorting_weight: 81
      filters:
        - median
    breath_voc_equivalent:
      # Volatile organic compounds equivalent estimate in ppm
      name: "Breath VOC Equivalent"
      id: breath_voc
      unit_of_measurement: "ppm"
      web_server:
        sorting_weight: 91
      filters:
        - median

text_sensor:
  - platform: template
    name: "IAQ Classification"
    icon: "mdi:checkbox-marked-circle-outline"
    web_server:
      sorting_weight: 60
    lambda: |-
      if (int(id(iaq).state) <= 50) {
        return {"Excellent"};
      }
      else if (int(id(iaq).state) <= 100) {
        return {"Good"};
      }
      else if (int(id(iaq).state) <= 150) {
        return {"Lightly polluted"};
      }
      else if (int(id(iaq).state) <= 200) {
        return {"Moderately polluted"};
      }
      else if (int(id(iaq).state) <= 250) {
        return {"Heavily polluted"};
      }
      else if (int(id(iaq).state) <= 350) {
        return {"Severely polluted"};
      }
      else if (int(id(iaq).state) <= 500) {
        return {"Extremely polluted"};
      }
      else {
        return {"unknown"};
      }

  - platform: bme680_bsec
    iaq_accuracy:
      # IAQ accuracy as a text value of Stabilizing, Uncertain, Calibrating, Calibrated
      name: "AQI Accuracy"
      web_server:
        sorting_weight: 61