substitutions:
  devicename: garage-cleversensor
  entity_name: garage_cleversensor
  friendly_name: Garage CleverSensor
  comment: Clever MultiSensor
  board: olimex_evb
  #framework: arduino
  framework: esp-idf
  network: wifi
  static_ip: !secret garage-cleversensor-ip
  i2c_id: bus_a
  mqtt_root_topic: !secret mqtt_root_topic

# For the ultrasonic sensors
  trigger1: 16
  echo1: 17
  trigger2: 19
  echo2: 20

# For the reed switches
  garage: 4
  outer: 5
  inner: 3

  sda: 21
  scl: 22

# Infrared Sensor
  ir_tx: 12
  ir_rx: 39

# I2C Pins
  i2c_sda: 13
  i2c_scl: 16

# For the ethernet adapter
  ethernet_mdc_pin: 23
  ethernet_mdio_pin: 18
  ethernet_clk_pin: 0

# For the relays
  relay1: 32 # Garage
  relay2: 33

# Built-in button
  button1: 34

esphome:
  name: ${devicename}
  friendly_name: ${friendly_name}
  name_add_mac_suffix: false

packages:
  board: !include common/olimex_evb_wifi.yaml
  device_base: !include common/device_base.yaml
  web_server: !include common/web_server.yaml
  bme680: !include common/bme68x_bsec2_i2c.yaml
  mqtt: !include common/mqtt_all.yaml

# remote_receiver:
#   pin: ${ir_rx}
#   dump: all

# remote_transmitter:
#   pin: ${ir_tx}
#   carrier_duty_percent: 50%

i2c:
  - id: ${i2c_id}
    sda: ${sda}
    scl: ${scl}

switch:
  - platform: gpio
    pin: ${relay1}
    name: "Relay1"

  - platform: gpio
    pin: ${relay2}
    name: "Relay2"

sensor:
  - platform: ultrasonic
    name: Car Sensor East Side
    trigger_pin: ${trigger1}
    echo_pin: ${echo1}
    id: ultrasonic1
    timeout: 4.0m
    update_interval: 0.5s
    filters:
      - or:
        - throttle_average: 30s
        - delta: 0.5
      - sliding_window_moving_average:
          window_size: 5
          send_every: 5
      - delta: 0.0254

  - platform: ultrasonic
    name: Car Sensor West Side
    trigger_pin: ${trigger2}
    echo_pin: ${echo2}
    id: ultrasonic2
    timeout: 4.0m
    update_interval: 0.5s
    filters:
      - or:
        - throttle_average: 30s
        - delta: 0.5
      - sliding_window_moving_average:
          window_size: 5
          send_every: 5
      - delta: 0.0254


binary_sensor:
  - platform: gpio
    name: "ESP32-EVB button"
    pin: ${button1}
    # on_press:
    #   - mqtt.publish:
    #       topic: "${mqtt_root_topic}/${devicename}/button"
    #       payload: "pressed"

  - platform: gpio
    name: "Garage Door"
    device_class: door
    pin:
      number: ${garage}
      mode: INPUT_PULLUP

  - platform: gpio
    name: "Outer Door"
    device_class: door
    pin:
      number: ${outer}
      mode: INPUT_PULLUP

  - platform: gpio
    name: "Inner Door"
    device_class: door
    pin:
      number: ${inner}
      mode: INPUT_PULLUP