# CT01 - A - Grid Phase A
# CT02 - G - Dryer
# CT03 - D - Furnace
# CT04 - B - Grid Phase B
# CT05 - E - Basement Plugs (Computer is on this circuit)
# CT06 - F - Nursery, Kitchen, and Dining Room Lights
# CT07 - C - Sump Pump Plug
# CT08 - H - Microwave Plug
# CT09 - I - Stove/Oven
# CT10 - J - Front Room Plugs
# CT11 - M - Heat Pump
# CT12 - L - Kitchen Circuit 1 (Fridge is on this circuit)

substitutions:
  devicename: power-monitor
  disp_name: power-monitor
  friendly_name: 'Power Monitor'
  entity_name: power_monitor
  comment: Circuit Setup Power Monitor
  static_ip: !secret power-monitor-ip
  platform: ESP32
  board: nodemcu-32s
  update_time: 2s
  kwh_report_interval: 60s
  watt_heartbeat: 60s
  throttle_time: 60s
  temp_delta: "5.0"
  temp_throttle: 60s
  watt_delta_lights: "2.0"
  watt_delta_appliances: "10.0"
  watt_delta_computers: "15.0"
  watt_delta_grid: "100.0"
  watt_throttle: 60s
  watt_accuracy_decimals: 1
  watt_label: W
  freq_throttle: 60s
  freq_delta: "0.02"
  grid_amp_delta: "0.20"
  amp_delta: "0.05"
  amp_throttle: 60s
  amp_accuracy_decimals: 2
  amp_label: A
  voltage_delta: 0.5
  voltage_heartbeat: 300s
  voltage_accuracy_decimals: 1
  voltage_label: V
  kwh_throttle: 60s
  kwh_label: kWh


  main_meter_name1: Meter 1-3
  main_meter_name2: Meter 4-6
  main_meter_id1: meter_main1
  main_meter_id2: meter_main2
## Addon1
  addon1_name1: Addon1 7-9
  addon1_name2: Addon1 10-12
  addon1_id1: addon1_1
  addon1_id2: addon1_2
## Addon2
  addon2_name1: Addon2 13-15
  addon2_name2: Addon2 16-18
  addon2_id1: addon2_1
  addon2_id2: addon2_2
## Addon3
  addon3_name1: Addon3 19-21
  addon3_name2: Addon3 22-24
  addon3_id1: addon3_1
  addon3_id2: addon3_2

  ct1_name: 'Grid Phase A'
  ct4_name: 'Grid Phase B'

  ct22_name: 'Well' # 1, 3 # sct010 - O
  ct12_name: 'Kitchen 1' # 5 # sct006 - L
  ct16_name: 'Kitchen 2' # 7 # sct006 - S
  ct18_name: 'Laundry Plug' # 9 # sct006 - N
  ct8_name: 'Microwave Plug' # 11 # sct006 - H
  ct17_name: 'Bathroom Plug' # 13 # sct006 - R
  ct11_name: 'Heat Pump' # 15, 17 - M
  ct24_name: 'Basement Bedroom and Furnace Room Lights' # 19 # sct006 - K
  ct5_name: 'Basement Plugs' # 21a # sct006 - E
  ct23_name: 'Basement and Laundry Lights and Plugs' # 21b # sct006 - W
  ct7_name: 'Sump Pump Plug' # 23 # sct006 - C

  ct6_name: 'Nursery, Dining, Kitchen Lights' # 2 # sct006 - F
  ct20_name: 'Master Suite' # 4 # sct006 - T
  ct3_name: 'Furnace' # 6 # sct006 - D
  ct15_name: 'Basement Stairs and Lights' # 8 # sct006 - P
  ct21_name: 'Dishwasher' # 10 # sct006 - V
  ct13_name: 'Garage Outside and Front Garage Lights' # 12 # sct006 - U
  ct10_name: 'Front Room Plugs' # 14 # sct006 - J
  ct14_name: 'Garage and Outside Plugs' # 16 # sct006 - Q
  ct9_name: 'Stove' # 18, 20 # sct016 - I
  ct2_name: 'Dryer' # 22, 24 # sct010 - G

  ct19_name: 'Unused'


# Current Transformers:
#  20A/25mA SCT-006: 11143
  sct006: '11143'
#  30A/1V SCT-013-030: 8650
#  50A/1V SCT-013-050: 15420
#  80A/26.6mA SCT-010: 41660
  sct010: '41660'
#  100A/50ma SCT-013-000: 27518
  sct013: '27518'
#  120A/40mA: SCT-016: 41787
  sct016: '41787'
#  200A/100mA SCT-024: 27518
  #current_cal: '27518'
# Jameco 9VAC Transformer:
#  For meter versions:
#  >= v1.3: 7305
  #voltage_cal: '7305'

## Main Board
  current_cal_ct1: '41787'
  current_cal_ct2: '41660'
  current_cal_ct3: '11143'
  current_cal_ct4: '41787'
  current_cal_ct5: '11143'
  current_cal_ct6: '11143'
## Addon1
  current_cal_ct7: '11143'
  current_cal_ct8: '11143'
  current_cal_ct9: '27518'
  current_cal_ct10: '11143'
  current_cal_ct11: '41660'
  current_cal_ct12: '11143'
## Addon2
  current_cal_ct13: '11143'
  current_cal_ct14: '11143'
  current_cal_ct15: '11143'
  current_cal_ct16: '11143'
  current_cal_ct17: '11143'
  current_cal_ct18: '11143'
## Addon3
  current_cal_ct19: '11143'
  current_cal_ct20: '11143'
  current_cal_ct21: '11143'
  current_cal_ct22: '41660'
  current_cal_ct23: '11143'
  current_cal_ct24: '11143'
# This only needs to be changed if you're using something other than the
# Jameco 9VAC Transformer:
  voltage_cal1: '7305'
  voltage_cal2: '7305'

  electric_freq: "60Hz"

  offset_calibration: "true"
  gain_calibration: "true"

  spi_clk: 18
  spi_miso: 19
  spi_mosi: 23
  main_ic1: 5
  addon1_ic1: 0
  addon2_ic1: 27
  addon3_ic1: 2
  main_ic2: 4
  addon1_ic2: 16
  addon2_ic2: 17
  addon3_ic2: 21

esphome:
  name: ${disp_name}
  friendly_name: "${friendly_name}"
  name_add_mac_suffix: false
  min_version: '2025.7.0'
  project:
    name: clever.6c-energy-meter-3-addons
    version: "1.7"

esp32:
  board: nodemcu-32s
  cpu_frequency: 240MHz
  framework:
    # ESPHome v2025.7.0 update to allow more than 6 SPI hardware devices on ESP-IDF
    type: esp-idf

captive_portal:

spi:
  clk_pin: ${spi_clk}
  miso_pin: ${spi_miso}
  mosi_pin: ${spi_mosi}

packages:
  wifi: !include common/wifi.yaml
  device_base: !include common/device_base.yaml
  mqtt: !include common/mqtt_null.yaml
  #mqtt: !include common/mqtt_all.yaml
  # device_base: !include common/complex_esp32_base.yaml
  #common: !include circuit-setup/6chan_common.yaml

  main: !include circuit-setup/meter_sensors/6chan_main_sensor.yaml
  # main_status: !include circuit-setup/status_fields/6chan_main_status.yaml
  # main_cal: !include circuit-setup/calibration/6chan_main_calibration.yaml
  # main_offset: !include circuit-setup/calibration/6chan_main_offset_calibrations.yaml

  addon1: !include circuit-setup/meter_sensors/6chan_addon1.yaml
  # addon1_status: !include circuit-setup/status_fields/6chan_addon1_status.yaml
  # addon1_cal: !include circuit-setup/calibration/6chan_addon1_calibration.yaml
  # addon1_offset: !include circuit-setup/calibration/6chan_addon1_offset_calibrations.yaml

  addon2: !include circuit-setup/meter_sensors/6chan_addon2.yaml
  # addon2_status: !include circuit-setup/status_fields/6chan_addon2_status.yaml
  # addon2_cal: !include circuit-setup/calibration/6chan_addon2_calibration.yaml
  # addon2_offset: !include circuit-setup/calibration/6chan_addon2_offset_calibrations.yaml

  addon3: !include circuit-setup/meter_sensors/6chan_addon3.yaml
  # addon3_status: !include circuit-setup/status_fields/6chan_addon3_status.yaml
  # addon3_cal: !include circuit-setup/calibration/6chan_addon3_calibration.yaml
  # addon3_offset: !include circuit-setup/calibration/6chan_addon3_offset_calibrations.yaml

# web_server:
#   port: 80

# text_sensor:
#   - id: !extend ${addon3_id1}
#     phase_status:
#       phase_a:
#         internal: true

sensor:
  ## The max value for current that the meter can output is 65.535. If you expect to measure current over 65A,
  ## divide the current_cal_ctx (above) by 2 (120A CT) or 4 (200A CT) and multiply the current and power values
  ## by 2 or 4, uncommenting the below and changing the id and phase_x accordingly
  #- id: !extend ${main_meter_id1} # CTs 1-3
  #  phase_a: # CT1
  #    current:
  #      filters:
  #        - multiply: 2
  #    power:
  #      filters:
  #        - multiply: 2
  #
  ## uncomment if monitoring 2 voltages
  #- id: !extend ${main_meter_id2}
  #  phase_a:
  #    voltage:
  #       name: Voltage 2
  #       id: ic2Volts
  #       accuracy_decimals: 1
  #  frequency:
  #    name: Frequency 2

  ## Comment out to show amps and watts per meter board in Home Assistant
  ## These were commented out altogether, so they wouldn't be calculated, even if they remained internal
  # - id: !extend totalAmpsMain
  #   internal: true
  # - id: !extend totalWattsMain
  # #   internal: true
  # - id: !extend totalAmpsAddOn1
  #   internal: true
  # - id: !extend totalWattsAddOn1
  #   internal: true
  # - id: !extend totalAmpsAddOn2
  #   internal: true
  # - id: !extend totalWattsAddOn2
  #   internal: true
  # - id: !extend totalAmpsAddOn3
  #   internal: true
  # - id: !extend totalWattsAddOn3
  #   internal: true

  - id: !extend ${addon3_id1}
    phase_a:
      power:
        internal: true
      current:
        internal: true

  - id: !remove ct19Kwh

  # Dishwasher on ct21
  - id: !extend ${addon3_id1}
    phase_c:
      power:
        qos: 0
        retain: true
        state_topic: ${mqtt_root_topic}/${devicename}/sensor/${ct21_name}/Watts
      current:
        qos: 0
        retain: true
        state_topic: ${mqtt_root_topic}/${devicename}/sensor/${ct21_name}/Amps

  - id: !extend ct21Kwh
    qos: 0
    retain: true
    state_topic: ${mqtt_root_topic}/${devicename}/sensor/${ct21_name}/kWh

  # Dryer on ct2
  - id: !extend ${main_meter_id1}
    phase_b:
      power:
        qos: 0
        retain: true
        state_topic: ${mqtt_root_topic}/${devicename}/sensor/${ct2_name}/Watts
      current:
        qos: 0
        retain: true
        state_topic: ${mqtt_root_topic}/${devicename}/sensor/${ct2_name}/Amps

  - id: !extend ct2Kwh
    qos: 0
    retain: true
    state_topic: ${mqtt_root_topic}/${devicename}/sensor/${ct2_name}/kWh

  # Washing Machine on ct18
  - id: !extend ${addon2_id2}
    phase_c:
      power:
        qos: 0
        retain: true
        state_topic: ${mqtt_root_topic}/${devicename}/sensor/${ct18_name}/Watts
      current:
        qos: 0
        retain: true
        state_topic: ${mqtt_root_topic}/${devicename}/sensor/${ct18_name}/Amps

  - id: !extend ct18Kwh
    qos: 0
    retain: true
    state_topic: ${mqtt_root_topic}/${devicename}/sensor/${ct18_name}/kWh

  #Total Amps
  ###########
  # - platform: template
  #   name: ${friendly_name} Total Amps
  #   id: totalAmps
  #   lambda: return id(totalAmpsMain).state + id(totalAmpsAddOn1).state + id(totalAmpsAddOn2).state + id(totalAmpsAddOn3).state ;
  #   accuracy_decimals: 2
  #   unit_of_measurement: A
  #   device_class: current
  #   update_interval: ${update_time}

  #Total Watts
  ############
  # - platform: template
  #   name: ${friendly_name} Total Watts
  #   id: totalWatts
  #   lambda: return id(totalWattsMain).state + id(totalWattsAddOn1).state + id(totalWattsAddOn2).state + id(totalWattsAddOn3).state ;
  #   accuracy_decimals: 1
  #   unit_of_measurement: W
  #   device_class: power
  #   update_interval: ${update_time}

  #kWh
  ####
  # - platform: total_daily_energy
  #   name: ${friendly_name} Total kWh
  #   power_id: totalWatts
  #   filters:
  #     - multiply: 0.001
  #   unit_of_measurement: kWh
  #   device_class: energy
  #   state_class: total_increasing

  #Total A From Grid
  - platform: template
    name: Grid A
    id: totalAmpsFromGrid
    lambda: return id(ct1Amps).state + id(ct4Amps).state ;
    accuracy_decimals: 1
    unit_of_measurement: A
    device_class: current
    state_class: measurement
    update_interval: ${update_time}
    filters:
      # Drop noise below 0.02A, then log 0.05A changes or every 60s
      - lambda: "return x < 0.02 ? 0 : x;"
      - or:
          - delta: ${amp_delta}
          - throttle: ${amp_throttle}

  #Total Watts From Grid
  - platform: template
    name: Grid W
    id: totalWattsFromGrid
    lambda: return id(ct1Watts).state + id(ct4Watts).state ;
    accuracy_decimals: 1
    unit_of_measurement: W
    device_class: power
    state_class: measurement
    update_interval: ${update_time}
    # filters:
    #   - or:
    #     - delta: 5.0
    #     - throttle_average: ${throttle_time}
    #   # - heartbeat: ${watt_heartbeat}

  #kWh From Grid
  - platform: total_daily_energy
    name: Grid kWh
    power_id: totalWattsFromGrid
    filters:
      - multiply: 0.001
      - throttle: ${kwh_throttle}
    unit_of_measurement: kWh
    device_class: energy
    state_class: total_increasing