# CircuitSetup 6 Channel Energy Meter 2nd Add-on board config
# Assumes jumpers are both in the 2nd position

sensor:
#IC1 AddOn 2
############
  - platform: atm90e32
    cs_pin: ${addon2_ic1}
    release_device: true
    id: ${addon2_id1}
    phase_a:
      current:
        name: ${ct13_name} ${amp_label}
        id: ct13Amps
        entity_category: diagnostic
        accuracy_decimals: ${amp_accuracy_decimals}
        filters:
          # Drop noise below 0.02A, then log 0.05A changes or every 60s
          - lambda: "return x < 0.02 ? 0 : x;"
          - or:
              - delta: ${amp_delta}
              - throttle: ${amp_throttle}
      power:
        name: ${ct13_name} ${watt_label}
        id: ct13Watts
        accuracy_decimals: 1
        filters:
          # Convert negative to positive (absolute value)
          - lambda: "return abs(x);"
          # Clip "ghost" watts when the device is off
          - lambda: "return x < 5.0 ? 0 : x;"
          - or:
              - delta: ${watt_delta_lights}
              - throttle: ${watt_throttle}
      gain_voltage: ${voltage_cal1}
      gain_ct: ${current_cal_ct13}
    phase_b:
      current:
        name: ${ct14_name} ${amp_label}
        id: ct14Amps
        entity_category: diagnostic
        accuracy_decimals: ${amp_accuracy_decimals}
        filters:
          # Drop noise below 0.02A, then log 0.05A changes or every 60s
          - lambda: "return x < 0.02 ? 0 : x;"
          - or:
              - delta: ${amp_delta}
              - throttle: ${amp_throttle}
      power:
        name: ${ct14_name} ${watt_label}
        id: ct14Watts
        accuracy_decimals: 1
        filters:
          # Convert negative to positive (absolute value)
          - lambda: "return abs(x);"
          # Clip "ghost" watts when the device is off
          - lambda: "return x < 5.0 ? 0 : x;"
          - or:
              - delta: ${watt_delta_lights}
              - throttle: ${watt_throttle}
      gain_voltage: ${voltage_cal1}
      gain_ct: ${current_cal_ct14}
    phase_c:
      current:
        name: ${ct15_name} ${amp_label}
        id: ct15Amps
        entity_category: diagnostic
        accuracy_decimals: ${amp_accuracy_decimals}
        filters:
          # Drop noise below 0.02A, then log 0.05A changes or every 60s
          - lambda: "return x < 0.02 ? 0 : x;"
          - or:
              - delta: ${amp_delta}
              - throttle: ${amp_throttle}
      power:
        name: ${ct15_name} ${watt_label}
        id: ct15Watts
        accuracy_decimals: 1
        filters:
          # Convert negative to positive (absolute value)
          - lambda: "return abs(x);"
          # Clip "ghost" watts when the device is off
          - lambda: "return x < 5.0 ? 0 : x;"
          - or:
              - delta: ${watt_delta_lights}
              - throttle: ${watt_throttle}
      gain_voltage: ${voltage_cal1}
      gain_ct: ${current_cal_ct15}
    line_frequency: ${electric_freq}
    gain_pga: 1X
    update_interval: ${update_time}
    enable_offset_calibration: ${offset_calibration}
    enable_gain_calibration: ${gain_calibration}
#IC2 AddOn 2
############
  - platform: atm90e32
    release_device: true
    cs_pin: ${addon2_ic2}
    id: ${addon2_id2}
    phase_a:
      current:
        name: ${ct16_name} ${amp_label}
        id: ct16Amps
        entity_category: diagnostic
        accuracy_decimals: ${amp_accuracy_decimals}
        filters:
          # Drop noise below 0.02A, then log 0.05A changes or every 60s
          - lambda: "return x < 0.02 ? 0 : x;"
          - or:
              - delta: ${amp_delta}
              - throttle: ${amp_throttle}
      power:
        name: ${ct16_name} ${watt_label}
        id: ct16Watts
        accuracy_decimals: 1
        filters:
          # Convert negative to positive (absolute value)
          - lambda: "return abs(x);"
          # Clip "ghost" watts when the device is off
          - lambda: "return x < 5.0 ? 0 : x;"
          - or:
              - delta: ${watt_delta_lights}
              - throttle: ${watt_throttle}
      gain_voltage: ${voltage_cal2}
      gain_ct: ${current_cal_ct16}
    phase_b:
      current:
        name: ${ct17_name} ${amp_label}
        id: ct17Amps
        entity_category: diagnostic
        accuracy_decimals: ${amp_accuracy_decimals}
        filters:
          # Drop noise below 0.02A, then log 0.05A changes or every 60s
          - lambda: "return x < 0.02 ? 0 : x;"
          - or:
              - delta: ${amp_delta}
              - throttle: ${amp_throttle}
      power:
        name: ${ct17_name} ${watt_label}
        id: ct17Watts
        accuracy_decimals: 1
        filters:
          # Convert negative to positive (absolute value)
          - lambda: "return abs(x);"
          # Clip "ghost" watts when the device is off
          - lambda: "return x < 5.0 ? 0 : x;"
          - or:
              - delta: ${watt_delta_lights}
              - throttle: ${watt_throttle}
      gain_voltage: ${voltage_cal2}
      gain_ct: ${current_cal_ct17}
    phase_c:
      current:
        name: ${ct18_name} ${amp_label}
        id: ct18Amps
        entity_category: diagnostic
        accuracy_decimals: ${amp_accuracy_decimals}
        filters:
          # Drop noise below 0.02A, then log 0.05A changes or every 60s
          - lambda: "return x < 0.02 ? 0 : x;"
          - or:
              - delta: ${amp_delta}
              - throttle: ${amp_throttle}
      power:
        name: ${ct18_name} ${watt_label}
        id: ct18Watts
        accuracy_decimals: 1
        filters:
          # Convert negative to positive (absolute value)
          - lambda: "return abs(x);"
          # Clip "ghost" watts when the device is off
          - lambda: "return x < 5.0 ? 0 : x;"
          - or:
              - delta: ${watt_delta_lights}
              - throttle: ${watt_throttle}
      gain_voltage: ${voltage_cal2}
      gain_ct: ${current_cal_ct18}
    line_frequency: ${electric_freq}
    gain_pga: 1X
    update_interval: ${update_time}
    enable_offset_calibration: ${offset_calibration}
    enable_gain_calibration: ${gain_calibration}

# #Total A AddOn2
#   - platform: template
#     name: Add-on 2 Total ${amp_label}
#     id: totalAmpsAddOn2
#     lambda: return id(ct13Amps).state + id(ct14Amps).state + id(ct15Amps).state + id(ct16Amps).state + id(ct17Amps).state + id(ct18Amps).state ;
#     accuracy_decimals: 2
#     unit_of_measurement: A
#     device_class: current
#     update_interval: ${update_time}

# #Total W AddOn2
#   - platform: template
#     name: Add-on 2 Total ${watt_label}
#     id: totalWattsAddOn2
#     lambda: return id(ct13Watts).state + id(ct14Watts).state + id(ct15Watts).state + id(ct16Watts).state + id(ct17Watts).state + id(ct18Watts).state ;
#     accuracy_decimals: 2
#     unit_of_measurement: W
#     device_class: power
#     update_interval: ${update_time}

  #kWh From CT 13
  - platform: total_daily_energy
    name: ${ct13_name} ${kwh_label}
    id: ct13Kwh
    power_id: ct13Watts
    filters:
      - multiply: 0.001
      - throttle: ${kwh_throttle}
    unit_of_measurement: kWh
    device_class: energy
    state_class: total_increasing

  # kWh from CT 14
  - platform: total_daily_energy
    name: ${ct14_name} ${kwh_label}
    id: ct14Kwh
    power_id: ct14Watts
    filters:
      - multiply: 0.001
      - throttle: ${kwh_throttle}
    unit_of_measurement: kWh
    device_class: energy
    state_class: total_increasing

  #kWh From CT 15
  - platform: total_daily_energy
    name: ${ct15_name} ${kwh_label}
    id: ct15Kwh
    power_id: ct15Watts
    filters:
      - multiply: 0.001
      - throttle: ${kwh_throttle}
    unit_of_measurement: kWh
    device_class: energy
    state_class: total_increasing

  #kWh From CT 16
  - platform: total_daily_energy
    name: ${ct16_name} ${kwh_label}
    id: ct16Kwh
    power_id: ct16Watts
    filters:
      - multiply: 0.001
      - throttle: ${kwh_throttle}
    unit_of_measurement: kWh
    device_class: energy
    state_class: total_increasing

  #kWh From CT 17
  - platform: total_daily_energy
    name: ${ct17_name} ${kwh_label}
    id: ct17Kwh
    power_id: ct17Watts
    filters:
      - multiply: 0.001
      - throttle: ${kwh_throttle}
    unit_of_measurement: kWh
    device_class: energy
    state_class: total_increasing

  #kWh From CT 18
  - platform: total_daily_energy
    name: ${ct18_name} ${kwh_label}
    id: ct18Kwh
    power_id: ct18Watts
    filters:
      - multiply: 0.001
      - throttle: ${kwh_throttle}
    unit_of_measurement: kWh
    device_class: energy
    state_class: total_increasing