Will pushing from the server break anything?

2026-08-10 02:50:12 -04:00 · 2025-12-06 09:12:49 -05:00
parent 78cd67a560
commit a49d981ad4
225 changed files with 2241 additions and 2237 deletions
@@ -1,106 +1,106 @@
-bme680_bsec:
-    # id
-    # -----------
-    # Identifier for this component, useful when working with multiple devices.
-    # Must be unique, and can be used in the sensor sections to refer to the correct device.
-    # Default: auto-computed
-    id: bme680_internal
-
-    # i2c address
-    # -----------
-    # Common values are:
-    # - 0x76
-    # - 0x77
-    # Default: 0x76
-    address: 0x76
-
-    # Temperature offset
-    # ------------------
-    # Useful if device is in enclosure and reads too high
-    # For example, if it reads 5C too high, set this to 5
-    # This also corrects the relative humidity readings
-    # Default: 0
-    temperature_offset: 0
-
-    # IAQ calculation mode
-    # --------------------
-    # Available options:
-    # - static (for fixed position devices)
-    # - mobile (for on a person or other moveable devices)
-    # Default: static
-    iaq_mode: static
-
-    # Supply voltage
-    # --------------------
-    # Available options:
-    # - 3.3V
-    # - 1.8V
-    # Default: 3.3V
-    supply_voltage: 3.3V
-
-    # Sample rate
-    # -----------
-    # Available options:
-    # - lp (low power - samples every 3 seconds)
-    # - ulp (ultra-low power - samples every 5 minutes)
-    # Default: lp
-    sample_rate: ulp
-
-    # Interval at which to save BSEC state
-    # ------------------------------------
-    # Default: 6h
-    state_save_interval: 6h
-
-sensor:
-  - platform: bme680_bsec
-    # ID of the bme680_bsec component to use for the next sensors.
-    # Useful when working with multiple devices
-    bme680_bsec_id: bme680_internal
-
-    temperature:
-      # Temperature in °C
-      name: "BME680 Temperature"
-      sample_rate: lp
-      filters:
-        - median
-    pressure:
-      # Pressure in hPa
-      name: "BME680 Pressure"
-      sample_rate: lp
-      filters:
-        - median
-    humidity:
-      # Relative humidity %
-      name: "BME680 Humidity"
-      sample_rate: lp
-      filters:
-        - median
-    gas_resistance:
-      # Gas resistance in Ω
-      name: "BME680 Gas Resistance"
-      filters:
-        - median
-    iaq:
-      # Indoor air quality value
-      name: "BME680 IAQ"
-      filters:
-        - median
-    iaq_accuracy:
-      # IAQ accuracy as a numeric value of 0, 1, 2, 3
-      name: "BME680 Numeric IAQ Accuracy"
-    co2_equivalent:
-      # CO2 equivalent estimate in ppm
-      name: "BME680 CO2 Equivalent"
-      filters:
-        - median
-    breath_voc_equivalent:
-      # Volatile organic compounds equivalent estimate in ppm
-      name: "BME680 Breath VOC Equivalent"
-      filters:
-        - median
-
-text_sensor:
-  - platform: bme680_bsec
-    iaq_accuracy:
-      # IAQ accuracy as a text value of Stabilizing, Uncertain, Calibrating, Calibrated
+bme680_bsec:
+    # id
+    # -----------
+    # Identifier for this component, useful when working with multiple devices.
+    # Must be unique, and can be used in the sensor sections to refer to the correct device.
+    # Default: auto-computed
+    id: bme680_internal
+
+    # i2c address
+    # -----------
+    # Common values are:
+    # - 0x76
+    # - 0x77
+    # Default: 0x76
+    address: 0x76
+
+    # Temperature offset
+    # ------------------
+    # Useful if device is in enclosure and reads too high
+    # For example, if it reads 5C too high, set this to 5
+    # This also corrects the relative humidity readings
+    # Default: 0
+    temperature_offset: 0
+
+    # IAQ calculation mode
+    # --------------------
+    # Available options:
+    # - static (for fixed position devices)
+    # - mobile (for on a person or other moveable devices)
+    # Default: static
+    iaq_mode: static
+
+    # Supply voltage
+    # --------------------
+    # Available options:
+    # - 3.3V
+    # - 1.8V
+    # Default: 3.3V
+    supply_voltage: 3.3V
+
+    # Sample rate
+    # -----------
+    # Available options:
+    # - lp (low power - samples every 3 seconds)
+    # - ulp (ultra-low power - samples every 5 minutes)
+    # Default: lp
+    sample_rate: ulp
+
+    # Interval at which to save BSEC state
+    # ------------------------------------
+    # Default: 6h
+    state_save_interval: 6h
+
+sensor:
+  - platform: bme680_bsec
+    # ID of the bme680_bsec component to use for the next sensors.
+    # Useful when working with multiple devices
+    bme680_bsec_id: bme680_internal
+
+    temperature:
+      # Temperature in °C
+      name: "BME680 Temperature"
+      sample_rate: lp
+      filters:
+        - median
+    pressure:
+      # Pressure in hPa
+      name: "BME680 Pressure"
+      sample_rate: lp
+      filters:
+        - median
+    humidity:
+      # Relative humidity %
+      name: "BME680 Humidity"
+      sample_rate: lp
+      filters:
+        - median
+    gas_resistance:
+      # Gas resistance in Ω
+      name: "BME680 Gas Resistance"
+      filters:
+        - median
+    iaq:
+      # Indoor air quality value
+      name: "BME680 IAQ"
+      filters:
+        - median
+    iaq_accuracy:
+      # IAQ accuracy as a numeric value of 0, 1, 2, 3
+      name: "BME680 Numeric IAQ Accuracy"
+    co2_equivalent:
+      # CO2 equivalent estimate in ppm
+      name: "BME680 CO2 Equivalent"
+      filters:
+        - median
+    breath_voc_equivalent:
+      # Volatile organic compounds equivalent estimate in ppm
+      name: "BME680 Breath VOC Equivalent"
+      filters:
+        - median
+
+text_sensor:
+  - platform: bme680_bsec
+    iaq_accuracy:
+      # IAQ accuracy as a text value of Stabilizing, Uncertain, Calibrating, Calibrated
      name: "BME680 IAQ Accuracy"