so many freaking changes!

esphome/power-monitor.yaml

@@ -78,6 +78,30 @@ substitutions:
 #  >= v1.3: 7305
   voltage_cal: '7305'
 
+
+  spi_clk: 18
+  spi_miso: 19
+  spi_mosi: 23
+  ic1_main: 5
+  ic1_addon1: 0
+  ic1_addon2: 27
+  ic1_addon3: 2
+  ic2_main: 4
+  ic2_addon1: 16
+  ic2_addon2: 17
+  ic2_addon3: 21
+
+# ethernet:
+#   id: eth
+#   type: W5500
+#   clk_pin: GPIO13
+#   mosi_pin: GPIO11
+#   miso_pin: GPIO12
+#   cs_pin: GPIO14
+#   interrupt_pin: GPIO10
+#   reset_pin: GPIO9
+
+
 packages:
   wifi: !include common/wifi.yaml
   # device_base: !include common/complex_esp32_base.yaml
@@ -95,19 +119,19 @@ time:
     timezone: America/Detroit
 
 logger:
-  level: DEBUG
-  logs:
-    sensor: DEBUG
+  # level: DEBUG
+  # logs:
+  #   sensor: DEBUG
 
 spi:
-  clk_pin: 18
-  miso_pin: 19
-  mosi_pin: 23
+  clk_pin: ${spi_clk}
+  miso_pin: ${spi_miso}
+  mosi_pin: ${spi_mosi}
 
 sensor:
 #IC1 Main
   - platform: atm90e32
-    cs_pin: 5
+    cs_pin: ${ic1_main}
     phase_a:
       voltage:
         name: ${friendly_name} [V]
@@ -171,7 +195,7 @@ sensor:
 
 #IC2 Main
   - platform: atm90e32
-    cs_pin: 4
+    cs_pin: ${ic2_main}
     phase_a:
       current:
         name: ${friendly_name} ${ct04Name} [A]
@@ -230,7 +254,7 @@ sensor:
 
 #IC1 AddOn 1
   - platform: atm90e32
-    cs_pin: 0
+    cs_pin: ${ic1_addon1}
     phase_a:
       power:
         name: ${friendly_name} ${ct07Name} [W]
@@ -273,7 +297,7 @@ sensor:
     update_interval: ${update_time}
 #IC2 AddOn 1
   - platform: atm90e32
-    cs_pin: 16
+    cs_pin: ${ic2_addon1}
     phase_a:
       power:
         name: ${friendly_name} ${ct10Name} [W]
@@ -318,7 +342,7 @@ sensor:
 
 #IC1 AddOn 2
   - platform: atm90e32
-    cs_pin: 27
+    cs_pin: ${ic1_addon2}
     phase_a:
       power:
         name: ${friendly_name} ${ct13Name} [W]
@@ -363,7 +387,7 @@ sensor:
     update_interval: ${update_time}
 #IC2 AddOn 2
   - platform: atm90e32
-    cs_pin: 17
+    cs_pin: ${ic2_addon2}
     phase_a:
       power:
         name: ${friendly_name} ${ct16Name} [W]
@@ -408,7 +432,7 @@ sensor:
 #IC1 AddOn 3
   - platform: atm90e32
 #do not use GPIO2 if ESP32 has an on-board LED assigned to it
-    cs_pin: 2
+    cs_pin: ${ic1_addon3}
     phase_a:
       power:
         name: ${friendly_name} ${ct19Name} [W]
@@ -449,7 +473,7 @@ sensor:
     update_interval: ${update_time}
 #IC2 AddOn 3
   - platform: atm90e32
-    cs_pin: 21
+    cs_pin: ${ic2_addon3}
     phase_a:
       power:
         #name: ${friendly_name} ${ct22Name} [W]