updating common esphome sensors

finally fixing hvac-multisensor. All of this was caused by the display switch referenced the display while it wasn't plugged in. Updated code to check for the existence first.
2026-08-10 02:50:12 -04:00 · 2025-07-20 12:33:08 -04:00
parent 4e0e55ac3c
commit 75fb9c2ab8
31 changed files with 1315 additions and 600 deletions
@@ -0,0 +1,233 @@
+# 3v3 en svp sun 34 35 32 33 25 26 27 14 12 gnd 13 sd2 sd3 gnd 5v
+substitutions:
+  devicename: hvac-multisensor-425f4f
+  entity_name: hvac_multisensor
+  friendly_name: HVAC MultiSensor
+  comment: Clever MultiSensor
+  platform: ESP32
+  board: wemos_d1_mini32
+  static_ip: !secret hvac-multisensor-ip
+
+  sda_pin: GPIO21
+  scl_pin: GPIO22
+  door_pin: GPIO19
+  one_wire_pin: GPIO14
+  trigger_pin: GPIO04
+  echo_pin: GPIO13
+
+  #mdc_pin: GPIO23
+  #mdio_pin: GPIO18
+  #clk_mode: GPIO17_OUT
+  #power_pin: GPIO5
+
+packages:
+  #wifi: !include common/wifi_no_power_save.yaml
+  ethernet: !include common/ethernet.yaml
+  device_base: !include common/device_base.yaml
+  ble_proxy: !include common/ble_proxy.yaml
+
+esphome:
+  name: ${devicename}
+  friendly_name: ${friendly_name}
+  name_add_mac_suffix: false
+  on_boot:
+    then:
+      - lambda: |-
+          if (id(oled)) {
+            id(oled_enabled) = true;
+          } else {
+            id(oled_enabled) = false;
+          }
+
+esp32:
+  board: ${board}
+  framework:
+    type: esp-idf
+
+web_server:
+  port: 80
+  version: 3
+  include_internal: true
+
+# Enable logging
+logger:
+  level: DEBUG
+  logs:
+    sensor: INFO
+    component: INFO
+    ultrasonic: INFO
+    ethernet: DEBUG
+
+api: # Using settings from common/device_base.yaml
+
+ota: # Using settings from common/device_base.yaml
+
+esp32_ble_tracker:
+
+globals:
+  - id: oled_enabled
+    type: bool
+    restore_value: yes
+    initial_value: 'false'
+
+  - id: screen_power
+    type: bool
+    restore_value: yes
+    initial_value: 'true'
+
+font:
+  - file: 'CascadiaMonoPL.ttf'
+    id: font1
+    size: 17
+
+one_wire:
+  - platform: gpio
+    pin: ${one_wire_pin}
+
+i2c:
+  sda: ${sda_pin}
+  scl: ${scl_pin}
+  frequency: 800kHz
+
+sensor:
+  - platform: dallas_temp
+    address: 0xB33C01B607798528
+    name: "Return Temperature"
+    id: hvac_return
+    update_interval: 10s
+    filters:
+      - lambda: return x * (9.0/5.0) + 32.0;
+    unit_of_measurement: "°F"
+    state_class: measurement
+
+  - platform: dallas_temp
+    address: 0x0F3C01B6070C1328
+    name: "Supply Temperature"
+    id: hvac_supply
+    update_interval: 10s
+    filters:
+      - lambda: return x * (9.0/5.0) + 32.0;
+    unit_of_measurement: "°F"
+    state_class: measurement
+
+  - platform: dallas_temp
+    address: 0xFA3C01B607005B28
+    name: "Ambient Temperature"
+    id: ambient
+    update_interval: 10s
+    filters:
+      - lambda: return x * (9.0/5.0) + 32.0;
+    unit_of_measurement: "°F"
+    state_class: measurement
+
+  - platform: template
+    name: "Delta Temperature"
+    id: hvac_delta
+    lambda: |-
+      return (id(hvac_supply).state - id(hvac_return).state);
+    update_interval: 10s
+    unit_of_measurement: "°F"
+    state_class: measurement
+    filters:
+      - or:
+        - throttle: 60s
+        - delta: 1.0
+
+  - platform: ultrasonic
+    trigger_pin: ${trigger_pin}
+    echo_pin: ${echo_pin}
+    id: ultrasonic_source
+    #update_interval: 5s
+    internal: True
+    filters:
+    - sliding_window_moving_average:
+        window_size: 5
+        send_every: 5
+        send_first_at: 1
+    on_value:
+      then:
+        - sensor.template.publish:
+            id: distance_from_bottom
+            state: !lambda 'return id(ultrasonic_source).state;'
+
+        - sensor.template.publish:
+            id: distance_from_top
+            state: !lambda 'return id(ultrasonic_source).state;'
+
+  - platform: template
+    unit_of_measurement: "cm"
+    state_class: measurement
+    id: distance_from_bottom
+    name: "Salt Level in CM"
+    #update_interval: 5s
+    filters:
+    - lambda: 'return (0.94 - (id(ultrasonic_source).state)) * 100;'
+    on_value:
+      then:
+        - sensor.template.publish:
+            id: level_in_bags
+            state: !lambda 'return id(distance_from_bottom).state;'
+
+  - platform: template
+    unit_of_measurement: "cm"
+    state_class: measurement
+    id: distance_from_top
+    name: "Salt Level From Top in CM"
+    #update_interval: 5s
+    filters:
+    - lambda: 'return (id(ultrasonic_source).state) * 100;'
+
+  - platform: template
+    unit_of_measurement: "bags"
+    state_class: measurement
+    id: level_in_bags
+    name: "Salt Level in Bags"
+    #update_interval: 5s
+    filters:
+    - lambda: 'return (id(distance_from_bottom).state) / 17.5;'
+
+display:
+  - platform: ssd1306_i2c
+    id: oled
+    model: "SSD1306 128x64"
+    #reset_pin: GPIO14 #D0
+    address: 0x3C
+    lambda: |-
+      it.print(0, 0, id(font1), "Delta:");
+      it.printf(128, 0, id(font1), TextAlign::TOP_RIGHT, "%.1f°F", id(hvac_delta).state);
+      it.print(0, 16, id(font1), "Supply:");
+      it.printf(128, 16, id(font1), TextAlign::TOP_RIGHT, "%.1f°F", id(hvac_supply).state);
+      it.print(0, 32, id(font1), "Return:");
+      it.printf(128, 32, id(font1), TextAlign::TOP_RIGHT, "%.1f°F", id(hvac_return).state);
+      it.print(0, 48, id(font1), "Ambient:");
+      it.printf(128, 48, id(font1), TextAlign::TOP_RIGHT, "%.1f°F", id(ambient).state);
+
+binary_sensor:
+  - platform: gpio
+    name: "Door"
+    device_class: door
+    pin: ${door_pin}
+
+switch:
+  - platform: template
+    id: display_switch
+    name: "Display"
+    lambda: |-
+      if (id(screen_power)) {
+        if (id(oled_enabled)) {
+          id(oled).turn_on();
+        }
+      } else {
+        if (id(oled_enabled)) {
+          id(oled).turn_off();
+        }
+      }
+      return id(screen_power);
+    turn_on_action:
+      - lambda: |-
+          id(screen_power) = true;
+          // id(oled).turn_on();
+    turn_off_action:
+      - lambda: |-
+          id(screen_power) = false;
+          // id(oled).turn_off();