updating common esphome sensors

finally fixing hvac-multisensor. All of this was caused by the display switch referenced the display while it wasn't plugged in. Updated code to check for the existence first.

esphome/archive/furnace-room-multisensor.yaml

@@ -1,25 +1,49 @@
+# 3v3 en svp sun 34 35 32 33 25 26 27 14 12 gnd 13 sd2 sd3 gnd 5v
 substitutions:
   devicename: furnace-room-multisensor
   entity_name: furnace_room_multisensor
   friendly_name: Furnace Room MultiSensor
+  comment: Clever MultiSensor
   platform: ESP32
-  board: nodemcu-32s
+  board: wemos_d1_mini32
   static_ip: !secret furnace-room-multisensor-ip
 
+  sda_pin: GPIO21
+  scl_pin: GPIO22
+  door_pin: GPIO19
+
+
+  one_wire_pin: GPIO14
+  trigger_pin: GPIO04
+  echo_pin: GPIO12
+  #mdc_pin: GPIO23
+  #mdio_pin: GPIO18
+  #clk_mode: GPIO17_OUT
+  #power_pin: GPIO5
+
 packages:
-  #wifi: !include common/wifi.yaml
-  ethernet: !include common/olimex-evb.yaml
+  #wifi: !include common/wifi_no_power_save.yaml
+  ethernet: !include common/ethernet.yaml
   device_base: !include common/device_base.yaml
   ble_proxy: !include common/ble_proxy.yaml
 
-esp32:
-  board: esp32-poe-iso
+esphome:
+  name: ${devicename}
+  friendly_name: ${friendly_name}
 
+esp32:
+  board: ${board}
+  framework:
+    type: esp-idf
+
+# Enable logging
 logger:
-  level: DEBUG
-  logs:
-    dallas.sensor: NONE
-    sensor: NONE
+
+api: # Using settings from common/device_base.yaml
+
+ota: # Using settings from common/device_base.yaml
+
+esp32_ble_tracker:
 
 globals:
   - id: screen_power
@@ -32,14 +56,13 @@ font:
     id: font1
     size: 17
 
-dallas_temp:
-  - pin:
-      number: GPIO5 #D4
-    update_interval: 10s
+one_wire:
+  - platform: gpio
+    pin: ${one_wire_pin}
 
 i2c:
-  sda: GPIO13 #D1
-  scl: GPIO15 #D2
+  sda: ${sda_pin}
+  scl: ${scl_pin}
   frequency: 800kHz
 
 display:
@@ -49,48 +72,51 @@ display:
     #reset_pin: GPIO14 #D0
     address: 0x3C
     lambda: |-
-      it.print(0, 0, id(font1), "Delt:");
+      it.print(0, 0, id(font1), "Delta:");
       it.printf(128, 0, id(font1), TextAlign::TOP_RIGHT, "%.1f°F", id(hvac_delta).state);
-      it.print(0, 16, id(font1), "HVAC:");
-      it.printf(128, 16, id(font1), TextAlign::TOP_RIGHT, "%.1f°F", id(hvac).state);
-      it.print(0, 32, id(font1), "Retn:");
+      it.print(0, 16, id(font1), "Supply:");
+      it.printf(128, 16, id(font1), TextAlign::TOP_RIGHT, "%.1f°F", id(hvac_supply).state);
+      it.print(0, 32, id(font1), "Return:");
       it.printf(128, 32, id(font1), TextAlign::TOP_RIGHT, "%.1f°F", id(hvac_return).state);
-      it.print(0, 48, id(font1), "Ambt:");
+      it.print(0, 48, id(font1), "Ambient:");
       it.printf(128, 48, id(font1), TextAlign::TOP_RIGHT, "%.1f°F", id(ambient).state);
 
 sensor:
-  - platform: dallas
+  - platform: dallas_temp
     address: 0xB33C01B607798528
     name: "Return Temperature"
     id: hvac_return
+    update_interval: 10s
     filters:
       - lambda: return x * (9.0/5.0) + 32.0;
     unit_of_measurement: "°F"
     state_class: measurement
 
-  - platform: dallas
+  - platform: dallas_temp
     address: 0x0F3C01B6070C1328
-    name: "HVAC Temperature"
-    id: hvac
+    name: "Supply Temperature"
+    id: hvac_supply
+    update_interval: 10s
     filters:
       - lambda: return x * (9.0/5.0) + 32.0;
     unit_of_measurement: "°F"
     state_class: measurement
 
-  - platform: dallas
+  - platform: dallas_temp
     address: 0xFA3C01B607005B28
-    name: "Furnace Room Temperature"
+    name: "Ambient Temperature"
     id: ambient
+    update_interval: 10s
     filters:
       - lambda: return x * (9.0/5.0) + 32.0;
     unit_of_measurement: "°F"
     state_class: measurement
 
   - platform: template
-    name: "HVAC Delta"
+    name: "Delta Temperature"
     id: hvac_delta
     lambda: |-
-      return (id(hvac).state - id(hvac_return).state);
+      return (id(hvac_supply).state - id(hvac_return).state);
     update_interval: 10s
     unit_of_measurement: "°F"
     state_class: measurement
@@ -99,37 +125,9 @@ sensor:
         - throttle: 60s
         - delta: 1.0
 
-  # - platform: ultrasonic
-  #   trigger_pin: GPIO1 #D7
-  #   echo_pin: GPIO5 #D8
-  #   name: "Salt Level in percent"
-  #   update_interval: 1s
-  #   #update_interval: 10s
-  #   filters:
-  #   - lambda: return (0.86-x)*(100/0.86);
-  #   unit_of_measurement: "%"
-
-  # - platform: ultrasonic
-  #   trigger_pin: GPIO33 #D7
-  #   echo_pin: GPIO35 #D8
-  #   unit_of_measurement: "cm"
-  #   id: distance_from_bottom
-  #   name: "Salt Level in CM"
-  #   # pulse_time: 10us
-  #   #update_interval: 3h
-  #   #update_interval: 5s
-  #   #timeout: 4.0m
-  #   update_interval: 5s
-  #   filters:
-  #   - lambda: return ( 0.86 - x * 100;
-  #   - sliding_window_moving_average:
-  #       window_size: 5
-  #       send_every: 5
-  #       send_first_at: 1
-
   - platform: ultrasonic
-    trigger_pin: GPIO33 #D7
-    echo_pin: GPIO35 #D8
+    trigger_pin: ${trigger_pin}
+    echo_pin: ${echo_pin}
     id: ultrasonic_source
     #update_interval: 5s
     internal: True
@@ -182,10 +180,10 @@ sensor:
 
 binary_sensor:
   - platform: gpio
-    name: "Furnace Room Door"
+    name: "Door"
     device_class: door
     pin:
-      number: GPIO3 #D5
+      number: ${door_pin}
       mode: INPUT_PULLUP
 
   - platform: homeassistant
@@ -206,7 +204,7 @@ binary_sensor:
 switch:
   - platform: template
     id: display_switch
-    name: "HVAC Display Switch"
+    name: "Display"
     lambda: |-
       if (id(screen_power)) {
         id(oled).turn_on();