stop hating myself

2026-08-10 02:50:12 -04:00 · 2025-12-09 16:59:38 -05:00
parent a49d981ad4
commit 578edbc7dc
100 changed files with 11098 additions and 966 deletions
@@ -0,0 +1,223 @@
+# CircuitSetup 6 Channel Energy Meter Main Board with 1 add-on board, 3-Phase over ethernet - 12 current channels
+#
+# Uses the Lilygo T-ETH-Lite ESP32S3 and the CircuitSetup 6 Channel Energy Meter Ethernet Adapter.
+# Setup asumes JP12 and JP13 have been severed on the main and add-on board, and each phase has its 
+# own voltage transformer hooked up to the main board jack, and VA2 on each meter.
+#
+# Current Trasnformers must be in phase with their respective voltage:
+# Phase 1: CT1-CT6 (main board, add-on board left side)
+# Phase 2: CT7-CT9 (main board right)
+# Phase 3: CT10-CT12 (add-on board right)
+
+# See all options at https://esphome.io/components/sensor/atm90e32.html
+
+substitutions:
+# Change the disp_name to something you want  
+  disp_name: Energy Meter
+  friendly_name: CircuitSetup Energy Meter
+# Interval of how often the power data is updated
+  update_time: 10s
+
+# Change current_cal to the corresponding CT's that you're using
+# If different CTs per current channel, remove or change "${current_cal}" from 
+# "gain_ct" below and replace with the CT calibration number respectively
+# Current Transformers:
+#  20A/25mA SCT-006: 11143
+#  30A/1V SCT-013-030: 8650
+#  50A/1V SCT-013-050: 15420
+#  50A/16.6mA SCT-010: 41334
+#  80A/26.6mA SCT-010: 41660
+#  100A/50ma SCT-013-000: 27518
+#  120A/40mA: SCT-016: 41787
+#  200A/100mA SCT-024: 27518
+#  200A/50mA SCT-024: 55036
+  current_cal: '27518'
+
+# This only needs to be changed if you're using something other than the  
+# Jameco 9VAC Transformer: 
+  voltage_cal: '7305'
+
+esphome:
+  name: "${disp_name}"
+  friendly_name: "${friendly_name}"
+  name_add_mac_suffix: true
+  platformio_options:
+    board_build.flash_mode: dio
+  project:
+    name: circuitsetup.6c-energy-meter-ethernet
+    version: "1.6"
+
+packages:
+  common: github://CircuitSetup/Expandable-6-Channel-ESP32-Energy-Meter/Software/ESPHome/6chan_common_ethernet.yaml
+
+# Enable Home Assistant API
+# An encryption key is recommended and can be generated here:
+# https://esphome.io/components/api.html#configuration-variables
+api:
+#  encryption:
+#    key: "YOUR_ENCRYPTION_KEY_HERE"
+
+# Enable OTA updating
+ota:
+  - platform: esphome
+
+web_server:
+  port: 80
+
+sensor:
+#IC1 Main
+  - platform: atm90e32
+    cs_pin: 8
+    phase_a:
+      voltage:
+        name: ${disp_name} Volts Phase 1
+        id: voltsPhase1
+        accuracy_decimals: 1
+      power:
+        name: ${disp_name} CT1 Watts 
+        id: ct1Watts
+      gain_voltage: ${voltage_cal}
+      gain_ct: ${current_cal}
+    phase_b:
+      power:
+        name: ${disp_name} CT2 Watts 
+        id: ct2Watts
+      gain_voltage: ${voltage_cal}
+      gain_ct: ${current_cal}
+    phase_c:
+      power:
+        name: ${disp_name} CT3 Watts
+        id: ct3Watts
+      gain_voltage: ${voltage_cal}
+      gain_ct: ${current_cal}
+    frequency:
+      name: ${disp_name} Freq Phase 1
+    line_frequency: 50Hz
+    gain_pga: 1X
+    update_interval: ${update_time}
+#IC2 Main
+  - platform: atm90e32
+    cs_pin: 4
+    phase_a:
+      voltage:
+        name: ${disp_name} Volts Phase 2
+        id: voltsPhase2
+        accuracy_decimals: 1
+      power:
+        name: ${disp_name} CT7 Watts 
+        id: ct7Watts
+      gain_voltage: ${voltage_cal}
+      gain_ct: ${current_cal}
+    phase_b:
+      power:
+        name: ${disp_name} CT8 Watts 
+        id: ct8Watts
+      gain_voltage: ${voltage_cal}
+      gain_ct: ${current_cal}
+    phase_c:
+      power:
+        name: ${disp_name} CT9 Watts 
+        id: ct9Watts
+      gain_voltage: ${voltage_cal}
+      gain_ct: ${current_cal}
+    line_frequency: 50Hz
+    gain_pga: 1X
+    update_interval: ${update_time}
+#IC1 AddOn 1
+  - platform: atm90e32
+    cs_pin: 0
+    phase_a:
+      power:
+        name: ${disp_name} CT4 Watts
+        id: ct4Watts
+      gain_voltage: ${voltage_cal}
+      gain_ct: ${current_cal}
+    phase_b:
+      power:
+        name: ${disp_name} CT5 Watts
+        id: ct5Watts
+      gain_voltage: ${voltage_cal}
+      gain_ct: ${current_cal}
+    phase_c:
+      power:
+        name: ${disp_name} CT6 Watts
+        id: ct6Watts
+      gain_voltage: ${voltage_cal}
+      gain_ct: ${current_cal}
+    line_frequency: 50Hz
+    gain_pga: 1X
+    update_interval: ${update_time}
+#IC2 AddOn 1
+  - platform: atm90e32
+    cs_pin: 16
+    phase_a:
+      voltage:
+        name: ${disp_name} Volts Phase 3
+        id: voltsPhase3
+        accuracy_decimals: 1
+      power:
+        name: ${disp_name} CT10 Watts
+        id: ct10Watts
+      gain_voltage: ${voltage_cal}
+      gain_ct: ${current_cal}
+    phase_b:
+      power:
+        name: ${disp_name} CT11 Watts
+        id: ct11Watts
+      gain_voltage: ${voltage_cal}
+      gain_ct: ${current_cal}
+    phase_c:
+      power:
+        name: ${disp_name} CT12 Watts
+        id: ct12Watts
+      gain_voltage: ${voltage_cal}
+      gain_ct: ${current_cal}
+    line_frequency: 50Hz
+    gain_pga: 1X
+    update_interval: ${update_time}
+
+#Total Watts Phase 1
+  - platform: template
+    name: ${disp_name} Total Watts Phase 1
+    id: totalWattsPhase1
+    lambda: return id(ct1Watts).state + id(ct2Watts).state + id(ct3Watts).state + id(ct4Watts).state + id(ct5Watts).state + id(ct6Watts).state ;
+    accuracy_decimals: 1
+    unit_of_measurement: W
+    device_class: power
+    update_interval: ${update_time}
+#Total Watts Phase 2
+  - platform: template
+    name: ${disp_name} Total Watts Phase 2
+    id: totalWattsPhase2
+    lambda: return id(ct7Watts).state + id(ct8Watts).state + id(ct9Watts).state ;
+    accuracy_decimals: 1
+    unit_of_measurement: W
+    device_class: power
+    update_interval: ${update_time}
+#Total Watts Phase 3
+  - platform: template
+    name: ${disp_name} Total Watts Phase 3
+    id: totalWattsPhase3
+    lambda: return id(ct10Watts).state + id(ct11Watts).state + id(ct12Watts).state ;
+    accuracy_decimals: 1
+    unit_of_measurement: W
+    device_class: power
+    update_interval: ${update_time}
+#Total Watts
+  - platform: template
+    name: ${disp_name} Total Watts
+    id: totalWatts
+    lambda: return id(totalWattsPhase1).state + id(totalWattsPhase2).state + id(totalWattsPhase3).state ;
+    accuracy_decimals: 1
+    unit_of_measurement: W
+    device_class: power
+    update_interval: ${update_time}
+#kWh
+  - platform: total_daily_energy
+    name: ${disp_name} Total kWh
+    power_id: totalWatts
+    filters:
+      - multiply: 0.001
+    unit_of_measurement: kWh
+    device_class: energy
+    state_class: total_increasing