stop hating myself

esphome/circuit-setup/calibration/6chan_addon3_calibration.yaml

@@ -0,0 +1,65 @@
+# Details: https://esphome.io/components/sensor/atm90e32.html#calibration
+# Semi-automatic Calibration Buttons
+####################################
+button:
+  - platform: atm90e32
+    id: ${addon3_id1}
+    run_offset_calibration:
+      name: "1. Run ${addon3_name1} Offset Cal"
+    clear_offset_calibration:
+      name: "z1. Clear ${addon3_name1} Offset Cal"
+    run_power_offset_calibration:
+      name: "2. Run ${addon3_name1} Power Offset Cal"
+    clear_power_offset_calibration:
+      name: "z2. Clear ${addon3_name1} Power Offset Cal"
+    run_gain_calibration:
+      name: "3. Run ${addon3_name1} Gain Cal"
+    clear_gain_calibration:
+      name: "z3. Clear ${addon3_name1} Gain Cal"
+
+  - platform: atm90e32
+    id: ${addon3_id2}
+    run_offset_calibration:
+      name: "1. Run ${addon3_name2} Offset Cal"
+    clear_offset_calibration:
+      name: "z1. Clear ${addon3_name2} Offset Cal"
+    run_power_offset_calibration:
+      name: "2. Run ${addon3_name2} Power Offset Cal"
+    clear_power_offset_calibration:
+      name: "z2. Clear ${addon3_name2} Power Offset Cal"
+    run_gain_calibration:
+      name: "3. Run ${addon3_name2} Gain Cal"
+    clear_gain_calibration:
+      name: "z3. Clear ${addon3_name2} Gain Cal"
+
+# V & I Calibration Reference Fields
+####################################
+# Use these to input a known value being measured by a CT or voltage transformer
+number:
+  - platform: atm90e32
+    id: ${addon3_id1}
+    reference_voltage:
+      # will copy to phase_b/c for calibration reference
+      phase_a:
+        name: "${addon3_name1} Ref V 1"
+    reference_current:
+      phase_a:
+        name: "${ct19_name} Ref Current"
+      phase_b:
+        name: "${ct20_name} Ref Current"
+      phase_c:
+        name: "${ct21_name} Ref Current"
+
+  - platform: atm90e32
+    id: ${addon3_id2}
+    reference_voltage:
+      # needed to calibrate voltage registers even if not output
+      phase_a:
+        name: "${addon3_name2} Ref V 2" 
+    reference_current:
+      phase_a:
+        name: "${ct22_name} Ref Current"
+      phase_b:
+        name: "${ct23_name} Ref Current"
+      phase_c:
+        name: "${ct24_name} Ref Current"