initial push

2026-08-10 02:50:12 -04:00 · 2024-04-14 14:08:56 -04:00
commit 53bf393d14
1111 changed files with 71730 additions and 0 deletions
@@ -0,0 +1,92 @@
+input_number:
+  keurig_on:
+    name: Keurig On
+    min: 0
+    max: 2000
+    step: 0.1
+    mode: box
+
+  keurig_warming_water:
+    name: Keurig Warming Water
+    min: 0
+    max: 2000
+    step: 0.1
+    mode: box
+
+  keurig_brewing:
+    name: Keurig Brewing
+    min: 0
+    max: 2000
+    step: 0.1
+    mode: box
+
+  keurig_pouring:
+    name: Keurig Pouring
+    min: 0
+    max: 2000
+    step: 0.1
+    mode: box
+
+  keurig_carafe:
+    name: Keurig Carafe
+    min: 0
+    max: 2000
+    step: 0.1
+    mode: box
+
+binary_sensor:
+  - platform: template
+    sensors:
+
+      keurig_on:
+        friendly_name: 'Keurig On'
+        value_template: "{{ states('sensor.pm_kitchen_2_w') | float(default=0) < states('input_number.keurig_on') | float(default=0) }}"
+
+      keurig_warming_water:
+        friendly_name: 'Keurig Warming Water'
+        value_template: "{{ states('sensor.pm_kitchen_2_w') | float(default=0) > states('input_number.keurig_warming_water') | float(default=0) }}"
+        delay_off: "00:00:20"
+
+      keurig_brewing:
+        friendly_name: 'Keurig Brewing'
+        value_template: "{{ states('sensor.pm_kitchen_2_w') | float(default=0) > states('input_number.keurig_brewing') | float(default=0) }}"
+
+      keurig_pouring:
+        friendly_name: 'Keurig Pouring'
+        value_template: "{{ states('sensor.pm_kitchen_2_w') | float(default=0) > states('input_number.keurig_pouring') | float(default=0) }}"
+
+      keurig: #This still needs to watch the Shelly sensor, rather than the circuit, so devices plugged into other outlets don't interfere with this sensor.
+        unique_id: templatebinarysensor.keurig
+        friendly_name: Keurig
+        value_template: "{{ states('sensor.shelly_keurig_w') | float(default=0) > states('input_number.keurig_brewing') | float(default=0) }}"
+        delay_on:
+          seconds: 50 # If you press a button the keurig will wake up, but not actually brew.
+        delay_off:
+          seconds: 30
+        icon_template: mdi:coffee-maker
+
+        attribute_templates:
+          model_number: 'K-Duo Essentials'
+          serial_number: '5000 3100 08558 19'
+          power: "{{ states('sensor.shelly_keurig_w') | float(default=0)}}"
+          target: "{{ states('input_number.keurig_brewing') | float(default=0)}}"
+
+      keurig_carafe:
+        unique_id: templatebinarysensor.keurig_carafe
+        friendly_name: Keurig Carafe
+        value_template: "{{ states('sensor.shelly_keurig_w') | float(default=0) > states('input_number.keurig_carafe') | float(default=0) }}"
+        # The largest cup takes just under 3 minutes to brew. If the keurig is on for over 3 minutes
+        # someone is brewing a pot of coffee, rather than using a k-cup
+        delay_on:
+          minutes: 4
+
+        # If this sensor is still on when binary_sensor.keurig turns off, a K-Cup was brewed and should
+        # be considered consumed.
+        delay_off:
+          seconds: 40
+        icon_template: mdi:coffee-maker
+        attribute_templates:
+          model_number: 'K-Duo Essentials'
+          serial_number: '5000 3100 08558 19'
+          power: "{{ states('sensor.shelly_keurig_w') | float(default=0)}}"
+          target: "{{ states('input_number.keurig_carafe') | float(default=0)}}"